Brunner yoke fitting

[rdl]

Hi have to fit my brunner yokes behind a panel and like to know if it is easy to take the yoke from the shaft to push it in from behind.
Thanks,

Rudolf

 

[JackZ]

It is doable, but a bit tricky, because the yoke itself is screwed on a metallic mounting bracket which is fitted on the yoke tube. Don't think that the bracket can be removed. The bracket is aluminium and size kinda 8x12x3 cms (from memory)
There is a BTR screw under the center of the Yoke that has to be unscrewed first. Talking about the CLS-E, not the NG