Configuration display Prosim

Pierrot77 · 24 Août 2017

Bonjour à tous
Jaurais besoin d'un petit éclaircissement concernant la configuration Prosim display car je m'y perd un peu dans les choix disponibles
et dans la façon de procéder .
J'utilise pour mon home cockpit 2 pc
Le principal est équipé de 2 cartes graphiques Nvidia GTX 960 et gtx 740 pour le PFD et ND et sur l'autre carte du même PC EICAS Haut et EICAS Bas .
Quand mes switchs Main Panel Dus et Lower DU sont positionnés sur normal je dois choisir quoi dans la configuration setup ????
Display F1 et F2 ou bien choisir Display --Static --Captain PFD et Captain ND
Car je n'arrive pas à obtenir sur mon EICAS BAS la permutation des ecrans ENG et SYS que je devais obtenir normalement
Je vous remercie pour votre aide.Cordinateuralement

Silverstar · 24 Août 2017

Salut Pierrot,

Suivant les assignations des switchs dans configuration, la permutation des affichages se fera automatiquement.

Pour ENG SYS, il faut que tu assignes les switch au fonction pushed (bouton poussoir).

Si tu mets en STATIC ils apparaîtront tout le temps même en Cold and Dark. Il faut que tu choisisses F1 F2 F3 F4 F5 F6.
Dans le Config Setup voila les assignations.

Il faut que tu fasses 4 dossiers Prosim Display :

1 pour le PFD/ND capt'ain
1 pour le Upper Eicas
1 pour le Lower Eicas
1 pour le PFD/ND First officer

stephanev · 24 Août 2017

Juste une remarque, si les affichages sont sur le meme ecran, par exemple PFD et ND un seul Prosim display suffit pour ces 2 affichages, il suffit alors de choisir F1 et F2 comme le dit Silverstar.
Par exemple dans mon MIP j ai un boitier matrox avec 3 ecrans et avec un seul Prosim display j affiche F1, F2, F3, F4, F5

Pierrot77 · 24 Août 2017

Bonsoir Silver et Stephane
Silver quand tu dis Il faut que tu fasses 4 dossiers Prosim Display :
Tu veux dire que je fais 4 copier collé de licone Prosim Display sur le bureau ou bien
faut il en décompacter 4 du dossier compressé de Prosim Display ????

Dans l'onglet Prosim switch j'ai bien effectué ce que tu me dis , ça c'est bon.
Stephane
j'ai une Matrox digital qui n'est pas utilisée , je serais tenté de m'en servir pour Pfd cap +ND Eicas haut et Pfd et ND copilote
+ Nd seulement sur mon MIP je n'ai pas les mêmes Marques d'écrans au niveau des résolutions natives ??
Celui capit'aine c'est 1920x1080 celui du milieu le 15 1024x768 et celui copilote 1680x1050 , Matrox peut gérer cela sans problèmes ????
Merci de vos réponses
Pierre :|

Silverstar · 24 Août 2017

Je laisse Stéphane te répondre pour les résolutions de la Matrox!

Admettons que les résolutions soient compatible alors tu ouvres un seul display.exe et tu déportes chaque instance sur les écrans, tout sera enregistré dans le Config.XML

Si tu utilises une sortie de ta CG pour chaque écran alors il te faudra créer les 4 dossiers.

Tu créer 4 dossiers (Prosim display Capt; Prosim display Upper....)
Dans chaque dossier tu colles le display.exe principale (tu ne change pas le nom de lexe, tu auras donc 4 display.exe dans 4 dossiers differents), quand tu les lanceras ils créeront chacun un Config.Xml dans leur dossier respectif.
Ca va te permettre de placer tes écrans et de les gardé en mémoire.

Ainsi quand tu lanceras Prosim chaque display.exe ira chercher son XML dans son propre dossier, et il s'afficheront sur ton MIP.

Pierrot77 · 24 Août 2017

Merci beaucoup Silver
je vais essayer de mettre en application ce que tu mas expliqué avec patience
jarrivais à faire fonctionner tout Prosim mais je savais que ma solution de faire fonctionner mes display
n'était pas la bonne

Merci à toi
Pierre

stephanev · 25 Août 2017

Pour le boitier Matrox qui peut le plus peut le moins donc tes écrans avec la plus haute résolution vont devoir sadapter à la plus basse soit 1024*768. De mémoire c'est ce que également ce que j'ai mon EICAS haut est un petit 15 en faible résolution et les 2 autres écrans (CPT & FO) sont des HD cela fonctionne sans problème sur le boitier Matrox. Dans ce cas si tu parts sur cette config tu nauras besoin que d'une instance de Prosim display pour ces 3 écrans.
N'hésites pas si tu as besoin.

Pierrot77 · 25 Août 2017

Bonjour Stephane
J'ai essayé de faire pour commencer la méthode Silver , bon j'ai presque réussi , juste quelques bugs au niveau des boutons poussoirs
ENG et SYS la permutation n'est pas bonne !!!
Je dois positionner le switch rotatif Lower DU sur ENG PRI sur le MIP pour que l'affichage du Lower Eicas soit correct.
Si je positionne ce switch sur normal eh bien , rien ne s'affiche sur mon Eicas bas.
Je pense que cela n'est pas bon .
Si je n'arrive pas à trouver la solution jessaierais d'utiliser mon boitier Matrox.
Je te remercie Stephane de tes réponses
Pierre

Silverstar · 25 Août 2017

Vérifie bien que chaque display.exe est configuré pour l'affichage concerné.

Tu passes par SIOC ou autre, vérifie les affectations, on perd vite la boule avec les variables.

Quand tu dis ENG SYS la permutation n'est pas bonne c'est à dire ?

Silverstar · 29 Octobre 2017

Salut Pierrot, où en es tu avec tes Display?

Pierrot77 · 29 Octobre 2017

Bonsoir Silver
Bon effectivement je ne re post pas car j'ai trouvé un compromis depuis ma dernière intervention
Je fais avec :|
En fait pour que tous mes display fonctionnent correctement
Il faut que je positionne le switch rotatif lower DU côté CAP sur la position Engine Pri sinon
sur sa position normale j'ai l'affichage de leicas haut sur mon Eicas Bas et plus rien sur mon Eicas haut il est noir
Donc en mettant le switch rotatif dans la position citée plus haut tout va bien alors pour moi cela fera l'affaire.
Merci à vous de m'avoir aidé à trouver une solution
A bientôt pour la suite avec le remplacement de 3 gauges de mon overhead modifiées par notre ami FAB que je remercie au passage.
Le silence par rapport au traditionnel servos et la souplesse du fonctionnement des mouvements daiguilles est un pur bonheur.
Je ne regrette pas mon petit investissement sans compter la facilité du paramétrage des gauges avec la petite carte FDBus de FAB.
Donc je recommande vivement avec en plus un contact très sympathiquethique avec notre électronicien Fab au service de notre passion.
Donc Merci à tous et à toi Fab pour d'autres projets damélioration de mon cockpit B 737.

Amicalement
Pierre

fab · 30 Octobre 2017

Étrange ce positionnement de switch ... ! et merci pour ton retour sur la modification de tes jauges.

Silverstar · 30 Octobre 2017

A mon avis il y a une inversion entre le ENG PRI et le NORM, tu utilises SiOC? Est ce que tu peux m'envoyer ton Config.XML qui se trouve a la racine de ton dossier Prosim?

Pierrot77 · 30 Octobre 2017

Bonjour Silver
C'est possible car j'utilise la carte FDS-SYS1X de Flightdeck solutions pour tous les switchs et annonciateurs de mon MIP.
Je sais que j'ai galéré pour configurer mes switchs par la méthode automatique de Prosim car les valeurs affichées ne correspondaient pas forcement au n° de port sur la carte FDS , lequel avait raison !!!!! je nen sais rien !!!
J'utilise Sioc pour mes modules Opencockpit la boussole et mes switchs engine start et c'est tout
Comme demandé voici mon fichier config.xml de Prosim737
Voilà Silver qu'est ce qui cloche ????

Code:

<?xml version="1.0" encoding="utf-8"?>
<config>
  <hardware>
    <s'ystem type="[System]" serial="" inputs="1" outputs="0" gauge="false" lcd="false" numerical="false" analog="0" encoders="0" />
    <pokeys type="Pokeys" serial="33261" inputs="55" outputs="55" gauge="false" lcd="true" numerical="true" analog="7" encoders="24" />
    <pokeys type="Pokeys" serial="33202" inputs="55" outputs="55" gauge="false" lcd="true" numerical="true" analog="7" encoders="24" />
    <pokeys type="Pokeys" serial="33258" inputs="55" outputs="55" gauge="false" lcd="true" numerical="true" analog="7" encoders="24" />
    <phidget type="PhidgetLED" serial="335988" inputs="0" outputs="64" gauge="false" lcd="false" numerical="false" analog="0" encoders="0" />
    <phidget type="PhidgetLED" serial="335944" inputs="0" outputs="64" gauge="false" lcd="false" numerical="false" analog="0" encoders="0" />
    <pou type="Maestro" serial="00072095" inputs="0" outputs="6" gauge="true" lcd="false" numerical="false" analog="0" encoders="0" />
    <fsuipc type="FSUIPC" serial="8 bit U" inputs="65535" outputs="65535" gauge="true" lcd="false" numerical="true" analog="1" encoders="0" />
    <fsuipc type="FSUIPC" serial="16 bit S" inputs="65535" outputs="65535" gauge="true" lcd="false" numerical="true" analog="1" encoders="1" />
    <fsuipc type="FSUIPC" serial="16 bit U" inputs="65535" outputs="65535" gauge="true" lcd="false" numerical="true" analog="1" encoders="0" />
    <fsuipc type="FSUIPC" serial="32 bit S" inputs="65535" outputs="65535" gauge="true" lcd="false" numerical="true" analog="1" encoders="1" />
    <fsuipc type="FSUIPC" serial="32 bit U" inputs="65535" outputs="65535" gauge="true" lcd="false" numerical="true" analog="1" encoders="0" />
    <fsuipc type="FSUIPC" serial="Float 32" inputs="0" outputs="65535" gauge="true" lcd="false" numerical="true" analog="1" encoders="0" />
    <fsuipc type="FSUIPC" serial="Float 64" inputs="0" outputs="65535" gauge="true" lcd="false" numerical="true" analog="1" encoders="0" />
    <pokeys type="Pokeys" serial="65283" inputs="55" outputs="55" gauge="false" lcd="true" numerical="true" analog="7" encoders="24" />
    <pou type="Maestro" serial="00068926" inputs="0" outputs="12" gauge="true" lcd="false" numerical="false" analog="0" encoders="0" />
    <FDS type="FDS HIO_128_256" serial="03EA000005F4" inputs="128" outputs="256" gauge="false" lcd="false" numerical="false" analog="0" encoders="0" />
    <directinput type="Saitek Pro Flight Rudder Pedals" serial="cdce9dd0-bb64-11e2-8001-444553540000" inputs="0" outputs="0" gauge="false" lcd="false" numerical="false" analog="3" encoders="0" />
    <directinput type="737YOKE-LE by ACE" serial="31b0cd80-5145-11e2-8001-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="2" encoders="0" />
    <directinput type="Virtual Joystick" serial="14e701d0-fc00-11e3-8003-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="6" encoders="0" />
    <directinput type="Virtual Joystick" serial="14e701d0-fc00-11e3-8004-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="6" encoders="0" />
    <directinput type="Virtual Joystick" serial="14e701d0-fc00-11e3-8005-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="6" encoders="0" />
    <fsuipc type="FSUIPC" serial="8 bit S" inputs="65535" outputs="65535" gauge="true" lcd="false" numerical="true" analog="1" encoders="1" />
    <iocp type="IOCP" serial="0" inputs="9999" outputs="9999" gauge="true" lcd="false" numerical="true" analog="9999" encoders="9999" />
    <pokeys type="Pokeys" serial="34055" inputs="55" outputs="55" gauge="false" lcd="true" numerical="true" analog="7" encoders="24" />
    <directinput type="Virtual Joystick" serial="14e701d0-fc00-11e3-8006-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="6" encoders="0" />
    <directinput type="BU0836A Interface" serial="e7ba6070-46be-11e5-8001-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="1" encoders="0" />
    <directinput type="Saitek Pro Flight Rudder Pedals" serial="dbd141f0-a502-11e5-8001-444553540000" inputs="0" outputs="0" gauge="false" lcd="false" numerical="false" analog="3" encoders="0" />
    <directinput type="737YOKE-LE by ACE" serial="7a5b8450-a6a9-11e5-8004-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="2" encoders="0" />
    <directinput type="Virtual Joystick" serial="7a5b8450-a6a9-11e5-8005-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="6" encoders="0" />
    <directinput type="Virtual Joystick" serial="7a5bab60-a6a9-11e5-8006-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="6" encoders="0" />
    <directinput type="Virtual Joystick" serial="7a5bd270-a6a9-11e5-8007-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="6" encoders="0" />
    <directinput type="Virtual Joystick" serial="7a5bd270-a6a9-11e5-8008-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="6" encoders="0" />
    <directinput type="BU0836A Interface" serial="33c74780-bd66-11e5-8001-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="1" encoders="0" />
    <directinput type="Virtual Joystick" serial="7a5bd270-a6a9-11e5-8009-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="6" encoders="0" />
    <pokeys type="Pokeys" serial="34064" inputs="55" outputs="55" gauge="false" lcd="true" numerical="true" analog="7" encoders="24" />
    <directinput type="BU0836X Interface" serial="87d88e30-fdf5-11e6-8001-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="0" encoders="0" />
    <directinput type="Virtual Joystick" serial="7a5bf980-a6a9-11e5-800a-444553540000" inputs="32" outputs="0" gauge="false" lcd="false" numerical="false" analog="6" encoders="0" />
    <pokeys type="Pokeys" serial="36945" inputs="55" outputs="55" gauge="false" lcd="true" numerical="true" analog="7" encoders="24" />
    <pou type="Maestro" serial="00180041" inputs="0" outputs="12" gauge="true" lcd="false" numerical="false" analog="0" encoders="0" />
    <FDS type="FDS 0000" serial="03EA000005F4" inputs="128" outputs="256" gauge="false" lcd="false" numerical="false" analog="0" encoders="0" />
  </hardware>
  <mappings>
    <mapping connection="Light Main Fixed L On">
      <pokeys serial="33202" port="28" type="SWITCH" />
    </mapping>
    <mapping connection="Light Main Fixed R On">
      <pokeys serial="33202" port="29" type="SWITCH" />
    </mapping>
    <mapping connection="Light Main Retract L On">
      <pokeys serial="33202" port="26" type="SWITCH" />
    </mapping>
    <mapping connection="Light Main Retract R On">
      <pokeys serial="33202" port="27" type="SWITCH" />
    </mapping>
    <mapping connection="Lights Runway turnoff L On">
      <pokeys serial="33202" port="4" type="SWITCH" />
    </mapping>
    <mapping connection="Lights Runway turnoff R On">
      <pokeys serial="33202" port="5" type="SWITCH" />
    </mapping>
    <mapping connection="Lights Anti collision On">
      <pokeys serial="33261" port="49" type="SWITCH" />
    </mapping>
    <mapping connection="Lights Logo On">
      <pokeys serial="33261" port="51" type="SWITCH" />
    </mapping>
    <mapping connection="Lights Wheel well On">
      <pokeys serial="33261" port="52" type="SWITCH" />
    </mapping>
    <mapping connection="Lights Wing On">
      <pokeys serial="33261" port="50" type="SWITCH" />
    </mapping>
    <mapping connection="Crossfeed On">
      <pokeys serial="33202" port="33" type="SWITCH" />
    </mapping>
    <mapping connection="Fuel Center Left On">
      <pokeys serial="33202" port="18" type="SWITCH" />
    </mapping>
    <mapping connection="Fuel Center Right On">
      <pokeys serial="33202" port="19" type="SWITCH" />
    </mapping>
    <mapping connection="Fuel Left Aft On">
      <pokeys serial="33202" port="17" type="SWITCH" />
    </mapping>
    <mapping connection="Fuel Left Fwd On">
      <pokeys serial="33202" port="15" type="SWITCH" />
    </mapping>
    <mapping connection="Fuel Right Aft On">
      <pokeys serial="33202" port="14" type="SWITCH" />
    </mapping>
    <mapping connection="Fuel Right Fwd On">
      <pokeys serial="33202" port="16" type="SWITCH" />
    </mapping>
    <mapping connection="Start 1 GRD">
      <pokeys serial="33202" port="25" type="SWITCH" />
    </mapping>
    <mapping connection="Start 1 CONT">
      <pokeys serial="33202" port="12" type="SWITCH" />
    </mapping>
    <mapping connection="Yaw damper On">
      <pokeys serial="33202" port="21" type="SWITCH" />
    </mapping>
    <mapping connection="APU switch Start">
      <pokeys serial="33202" port="13" type="SWITCH" />
    </mapping>
    <mapping connection="Battery switch On">
      <pokeys serial="33202" port="51" type="SWITCH" />
    </mapping>
    <mapping connection="Galley On">
      <pokeys serial="33202" port="50" type="SWITCH" />
    </mapping>
    <mapping connection="Ground Power On">
      <pokeys serial="33202" port="41" type="SWITCH" />
    </mapping>
    <mapping connection="Lights Taxi On">
      <pokeys serial="33202" port="6" type="SWITCH" />
    </mapping>
    <mapping connection="Standby power switch Auto">
      <pokeys serial="33202" port="47" type="SWITCH" />
    </mapping>
    <mapping connection="Standby power switch Bat">
      <pokeys serial="33202" port="48" type="SWITCH" />
    </mapping>
    <mapping connection="Alternate flaps ctrl Up">
      <pokeys serial="33202" port="54" type="SWITCH" />
    </mapping>
    <mapping connection="Alternate flaps ctrl Down">
      <pokeys serial="33202" port="52" type="SWITCH" />
    </mapping>
    <mapping connection="Attend Pushed">
      <pokeys serial="33202" port="36" type="SWITCH" />
    </mapping>
    <mapping connection="Ground call On">
      <pokeys serial="33202" port="37" type="SWITCH" />
    </mapping>
    <mapping connection="No Smoking Auto">
      <pokeys serial="33202" port="42" type="SWITCH" />
    </mapping>
    <mapping connection="No Smoking On">
      <pokeys serial="33202" port="43" type="SWITCH" />
    </mapping>
    <mapping connection="Seatbelt On">
      <pokeys serial="33202" port="39" type="SWITCH" />
    </mapping>
    <mapping connection="Flt Ctrl A Stby Rud">
      <pokeys serial="33261" port="26" type="SWITCH" />
    </mapping>
    <mapping connection="Flt Ctrl A A On">
      <pokeys serial="33261" port="20" type="SWITCH" />
    </mapping>
    <mapping connection="Flt Ctrl B Stby Rud">
      <pokeys serial="33261" port="19" type="SWITCH" />
    </mapping>
    <mapping connection="Flt Ctrl B B On">
      <pokeys serial="33261" port="21" type="SWITCH" />
    </mapping>
    <mapping connection="Spoiler A On">
      <pokeys serial="33261" port="27" type="SWITCH" />
    </mapping>
    <mapping connection="Spoiler B On">
      <pokeys serial="33261" port="25" type="SWITCH" />
    </mapping>
    <mapping connection="Elec maint Pushed">
      <pokeys serial="33261" port="7" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl AC STBY PWR">
      <pokeys serial="33261" port="0" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl AC GRD PWR">
      <pokeys serial="33261" port="1" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl AC GEN1">
      <pokeys serial="33261" port="2" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl AC APU GEN">
      <pokeys serial="33261" port="3" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl AC GEN2">
      <pokeys serial="33261" port="4" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl AC INV">
      <pokeys serial="33261" port="5" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl AC TEST">
      <pokeys serial="33261" port="6" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl DC STBY PWR">
      <pokeys serial="33261" port="11" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl DC BAT BUS">
      <pokeys serial="33261" port="12" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl DC BAT">
      <pokeys serial="33261" port="13" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl DC AUX BAT">
      <pokeys serial="33261" port="14" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl DC TR1">
      <pokeys serial="33261" port="15" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl DC TR2">
      <pokeys serial="33261" port="16" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl DC TR3">
      <pokeys serial="33261" port="17" type="SWITCH" />
    </mapping>
    <mapping connection="Elec Pnl DC TEST">
      <pokeys serial="33261" port="18" type="SWITCH" />
    </mapping>
    <mapping connection="Disconnect 1 Normal">
      <pokeys serial="33202" port="49" type="SWITCH" />
    </mapping>
    <mapping connection="Disconnect 2 Normal">
      <pokeys serial="33202" port="46" type="SWITCH" />
    </mapping>
    <mapping connection="Ignition select Left">
      <pokeys serial="33261" port="29" type="SWITCH" />
    </mapping>
    <mapping connection="Ignition select Right">
      <pokeys serial="33261" port="28" type="SWITCH" />
    </mapping>
    <mapping connection="Start 2 GRD">
      <pokeys serial="33261" port="30" type="SWITCH" />
    </mapping>
    <mapping connection="Start 2 CONT">
      <pokeys serial="33261" port="32" type="SWITCH" />
    </mapping>
    <mapping connection="APU switch Off">
      <pokeys serial="33202" port="7" type="SWITCH" />
    </mapping>
    <mapping connection="GEN 2 On">
      <pokeys serial="33261" port="46" type="SWITCH" />
    </mapping>
    <mapping connection="Alt horn cutout Pushed">
      <pokeys serial="33202" port="20" type="SWITCH" />
    </mapping>
    <mapping connection="Eng Anti-Ice 1 On">
      <pokeys serial="33261" port="39" type="SWITCH" />
    </mapping>
    <mapping connection="Eng Anti-Ice 2 On">
      <pokeys serial="33261" port="40" type="SWITCH" />
    </mapping>
    <mapping connection="Hyd ELEC1 On">
      <pokeys serial="33261" port="36" type="SWITCH" />
    </mapping>
    <mapping connection="Hyd ELEC2 On">
      <pokeys serial="33261" port="35" type="SWITCH" />
    </mapping>
    <mapping connection="Hyd ENG1 On">
      <pokeys serial="33261" port="34" type="SWITCH" />
    </mapping>
    <mapping connection="Hyd ENG2 On">
      <pokeys serial="33261" port="37" type="SWITCH" />
    </mapping>
    <mapping connection="Pressurization Auto">
      <pokeys serial="33261" port="41" type="SWITCH" />
    </mapping>
    <mapping connection="Pressurization Altn">
      <pokeys serial="33261" port="42" type="SWITCH" />
    </mapping>
    <mapping connection="Pressurization Man">
      <pokeys serial="33261" port="43" type="SWITCH" />
    </mapping>
    <mapping connection="Wing Anti-Ice On">
      <pokeys serial="33261" port="38" type="SWITCH" />
    </mapping>
    <mapping connection="Outflow valve Close">
      <pokeys serial="33261" port="48" type="SWITCH" />
    </mapping>
    <mapping connection="Bleed 1 On">
      <pokeys serial="33258" port="42" type="SWITCH" />
    </mapping>
    <mapping connection="Bleed 2 On">
      <pokeys serial="33258" port="11" type="SWITCH" />
    </mapping>
    <mapping connection="Bleed APU On">
      <pokeys serial="33258" port="43" type="SWITCH" />
    </mapping>
    <mapping connection="Probe heat A On">
      <pokeys serial="33258" port="1" type="SWITCH" />
    </mapping>
    <mapping connection="Probe heat B On">
      <pokeys serial="33258" port="2" type="SWITCH" />
    </mapping>
    <mapping connection="TAT test Pushed">
      <pokeys serial="33258" port="0" type="SWITCH" />
    </mapping>
    <mapping connection="Trip reset On">
      <pokeys serial="33258" port="54" type="SWITCH" />
    </mapping>
    <mapping connection="Window heat FWD L On">
      <pokeys serial="33258" port="4" type="SWITCH" />
    </mapping>
    <mapping connection="Window heat FWD R On">
      <pokeys serial="33258" port="7" type="SWITCH" />
    </mapping>
    <mapping connection="Window heat Side L On">
      <pokeys serial="33258" port="3" type="SWITCH" />
    </mapping>
    <mapping connection="Window heat Side R On">
      <pokeys serial="33258" port="41" type="SWITCH" />
    </mapping>
    <mapping connection="Window heat test OVHT">
      <pokeys serial="33258" port="6" type="SWITCH" />
    </mapping>
    <mapping connection="Window heat test PWR TEST">
      <pokeys serial="33258" port="5" type="SWITCH" />
    </mapping>
    <mapping connection="Bus transfer switch Auto">
      <pokeys serial="33202" port="35" type="SWITCH" />
    </mapping>
    <mapping connection="Pneumatic Isolation switch Open">
      <pokeys serial="33258" port="12" type="SWITCH" />
    </mapping>
    <mapping connection="Recirc Fan L Auto">
      <pokeys serial="33258" port="48" type="SWITCH" />
    </mapping>
    <mapping connection="Recirc Fan R Auto">
      <pokeys serial="33258" port="47" type="SWITCH" />
    </mapping>
    <mapping connection="Trim air On">
      <pokeys serial="33258" port="46" type="SWITCH" />
    </mapping>
    <mapping connection="APU GEN 1 On">
      <pokeys serial="33202" port="30" type="SWITCH" />
    </mapping>
    <mapping connection="APU GEN 2 On">
      <pokeys serial="33202" port="31" type="SWITCH" />
    </mapping>
    <mapping connection="GEN 1 On">
      <pokeys serial="33261" port="47" type="SWITCH" />
    </mapping>
    <mapping connection="Electric Panel Lower center">
      <pokeys serial="33261" port="515" type="NUMERICAL" />
    </mapping>
    <mapping connection="Electric Panel Lower left">
      <pokeys serial="33261" port="513" type="NUMERICAL" />
    </mapping>
    <mapping connection="Electric Panel Lower right">
      <pokeys serial="33261" port="518" type="NUMERICAL" />
    </mapping>
    <mapping connection="Electric Panel Upper left">
      <pokeys serial="33261" port="257" type="NUMERICAL" />
    </mapping>
    <mapping connection="Electric Panel Upper right">
      <pokeys serial="33261" port="260" type="NUMERICAL" />
    </mapping>
    <mapping connection="Pressurization altn">
      <phidget serial="335944" port="3" type="INDICATOR" />
    </mapping>
    <mapping connection="Pressurization manual">
      <phidget serial="335944" port="2" type="INDICATOR" />
    </mapping>
    <mapping connection="Crossfeed indicator">
      <phidget serial="335988" port="30" type="INDICATOR" />
      <phidget serial="335988" port="31" type="INDICATOR" />
    </mapping>
    <mapping connection="Filter Bypass L">
      <phidget serial="335988" port="34" type="INDICATOR" />
    </mapping>
    <mapping connection="Filter Bypass R">
      <phidget serial="335988" port="35" type="INDICATOR" />
    </mapping>
    <mapping connection="Fuel Center Left LP">
      <phidget serial="335988" port="33" type="INDICATOR" />
    </mapping>
    <mapping connection="Fuel Center Right LP">
      <phidget serial="335988" port="32" type="INDICATOR" />
    </mapping>
    <mapping connection="Fuel Left Aft LP">
      <phidget serial="335988" port="1" type="INDICATOR" />
    </mapping>
    <mapping connection="Fuel Left Fwd LP">
      <phidget serial="335988" port="0" type="INDICATOR" />
    </mapping>
    <mapping connection="Fuel Right Aft LP">
      <phidget serial="335988" port="28" type="INDICATOR" />
    </mapping>
    <mapping connection="Fuel Right Fwd LP">
      <phidget serial="335988" port="29" type="INDICATOR" />
    </mapping>
    <mapping connection="APU FAULT">
      <phidget serial="335988" port="2" type="INDICATOR" />
    </mapping>
    <mapping connection="APU GEN OFF BUS">
      <phidget serial="335988" port="60" type="INDICATOR" />
    </mapping>
    <mapping connection="APU Low oil pressure">
      <phidget serial="335988" port="38" type="INDICATOR" />
    </mapping>
    <mapping connection="APU Maint">
      <phidget serial="335988" port="61" type="INDICATOR" />
    </mapping>
    <mapping connection="Auto slat Fail">
      <phidget serial="335988" port="51" type="INDICATOR" />
    </mapping>
    <mapping connection="Bat discharge">
      <phidget serial="335988" port="43" type="INDICATOR" />
    </mapping>
    <mapping connection="Drive 1">
      <phidget serial="335988" port="42" type="INDICATOR" />
    </mapping>
    <mapping connection="Drive 2">
      <phidget serial="335988" port="15" type="INDICATOR" />
    </mapping>
    <mapping connection="ELEC">
      <phidget serial="335988" port="16" type="INDICATOR" />
    </mapping>
    <mapping connection="ENG Valve Closed L">
      <phidget serial="335988" port="18" type="INDICATOR" />
      <phidget serial="335988" port="19" type="INDICATOR" />
    </mapping>
    <mapping connection="ENG Valve Closed R">
      <phidget serial="335988" port="36" type="INDICATOR" />
      <phidget serial="335988" port="37" type="INDICATOR" />
    </mapping>
    <mapping connection="Feel Diff Press">
      <phidget serial="335988" port="47" type="INDICATOR" />
    </mapping>
    <mapping connection="FLT Control low pressure A">
      <phidget serial="335988" port="49" type="INDICATOR" />
    </mapping>
    <mapping connection="FLT Control low pressure B">
      <phidget serial="335988" port="48" type="INDICATOR" />
    </mapping>
    <mapping connection="GEN BUS OFF 1">
      <phidget serial="335988" port="58" type="INDICATOR" />
    </mapping>
    <mapping connection="GEN BUS OFF 2">
      <phidget serial="335988" port="27" type="INDICATOR" />
    </mapping>
    <mapping connection="Grd Pwr available">
      <phidget serial="335988" port="26" type="INDICATOR" />
    </mapping>
    <mapping connection="Hyd standby low pressure">
      <phidget serial="335988" port="52" type="INDICATOR" />
    </mapping>
    <mapping connection="Hyd standby low quantit'y">
      <phidget serial="335988" port="53" type="INDICATOR" />
    </mapping>
    <mapping connection="Mach Trim Fail">
      <phidget serial="335988" port="44" type="INDICATOR" />
    </mapping>
    <mapping connection="Source OFF 1">
      <phidget serial="335988" port="59" type="INDICATOR" />
    </mapping>
    <mapping connection="Source OFF 2">
      <phidget serial="335988" port="41" type="INDICATOR" />
    </mapping>
    <mapping connection="SPAR Valve Closed L">
      <phidget serial="335988" port="63" type="INDICATOR" />
      <phidget serial="335988" port="62" type="INDICATOR" />
    </mapping>
    <mapping connection="SPAR Valve Closed R">
      <phidget serial="335988" port="21" type="INDICATOR" />
      <phidget serial="335988" port="20" type="INDICATOR" />
    </mapping>
    <mapping connection="Speed Trim Fail">
      <phidget serial="335988" port="46" type="INDICATOR" />
    </mapping>
    <mapping connection="Standby pwr off">
      <phidget serial="335988" port="14" type="INDICATOR" />
    </mapping>
    <mapping connection="TR UNIT">
      <phidget serial="335988" port="17" type="INDICATOR" />
    </mapping>
    <mapping connection="Transfer bus OFF 1">
      <phidget serial="335988" port="56" type="INDICATOR" />
    </mapping>
    <mapping connection="Transfer bus OFF 2">
      <phidget serial="335988" port="39" type="INDICATOR" />
    </mapping>
    <mapping connection="Yaw damper">
      <phidget serial="335988" port="50" type="INDICATOR" />
    </mapping>
    <mapping connection="APU Overspeed">
      <phidget serial="335988" port="3" type="INDICATOR" />
    </mapping>
    <mapping connection="Attend call">
      <phidget serial="335988" port="57" type="INDICATOR" />
    </mapping>
    <mapping connection="Emerg Exit Lights not armed">
      <phidget serial="335988" port="40" type="INDICATOR" />
    </mapping>
    <mapping connection="Equip cooling exhaust Off">
      <phidget serial="335988" port="54" type="INDICATOR" />
    </mapping>
    <mapping connection="Equip cooling supply Off">
      <phidget serial="335988" port="55" type="INDICATOR" />
    </mapping>
    <mapping connection="Alpha Vane Heat L">
      <phidget serial="335944" port="6" type="INDICATOR" />
    </mapping>
    <mapping connection="Alpha Vane Heat R">
      <phidget serial="335944" port="18" type="INDICATOR" />
    </mapping>
    <mapping connection="Bleed trip off 1">
      <phidget serial="335944" port="4" type="INDICATOR" />
    </mapping>
    <mapping connection="Bleed trip off 2">
      <phidget serial="335944" port="1" type="INDICATOR" />
    </mapping>
    <mapping connection="Capt Pitot Heat">
      <phidget serial="335944" port="23" type="INDICATOR" />
    </mapping>
    <mapping connection="Copilot Pitot Heat">
      <phidget serial="335944" port="11" type="INDICATOR" />
    </mapping>
    <mapping connection="Cowl Anti-Ice L">
      <phidget serial="335944" port="12" type="INDICATOR" />
    </mapping>
    <mapping connection="Cowl Anti-Ice R">
      <phidget serial="335944" port="48" type="INDICATOR" />
    </mapping>
    <mapping connection="Cowl valve open L">
      <phidget serial="335944" port="24" type="INDICATOR" />
      <phidget serial="335944" port="25" type="INDICATOR" />
    </mapping>
    <mapping connection="Cowl valve open R">
      <phidget serial="335944" port="50" type="INDICATOR" />
      <phidget serial="335944" port="51" type="INDICATOR" />
    </mapping>
    <mapping connection="Door Aft Cargo">
      <phidget serial="335944" port="39" type="INDICATOR" />
    </mapping>
    <mapping connection="Door Aft Entry">
      <phidget serial="335944" port="34" type="INDICATOR" />
    </mapping>
    <mapping connection="Door Aft Service">
      <phidget serial="335944" port="36" type="INDICATOR" />
    </mapping>
    <mapping connection="Door Equip">
      <phidget serial="335944" port="60" type="INDICATOR" />
    </mapping>
    <mapping connection="Door Fwd Cargo">
      <phidget serial="335944" port="38" type="INDICATOR" />
    </mapping>
    <mapping connection="Door Fwd entry">
      <phidget serial="335944" port="58" type="INDICATOR" />
    </mapping>
    <mapping connection="Door Fwd Service">
      <phidget serial="335944" port="57" type="INDICATOR" />
    </mapping>
    <mapping connection="Door Left Aft Overwing">
      <phidget serial="335944" port="35" type="INDICATOR" />
    </mapping>
    <mapping connection="Door Left Fwd Overwing">
      <phidget serial="335944" port="59" type="INDICATOR" />
    </mapping>
    <mapping connection="Door Right Aft Overwing">
      <phidget serial="335944" port="37" type="INDICATOR" />
    </mapping>
    <mapping connection="Dual bleed">
      <phidget serial="335944" port="49" type="INDICATOR" />
    </mapping>
    <mapping connection="Elev pitot Heat L">
      <phidget serial="335944" port="22" type="INDICATOR" />
    </mapping>
    <mapping connection="Elev pitot Heat R">
      <phidget serial="335944" port="10" type="INDICATOR" />
    </mapping>
    <mapping connection="Engine 1 overheat">
      <phidget serial="335944" port="42" type="INDICATOR" />
    </mapping>
    <mapping connection="Engine 2 overheat">
      <phidget serial="335944" port="43" type="INDICATOR" />
    </mapping>
    <mapping connection="Hyd ELEC1 LP">
      <phidget serial="335944" port="40" type="INDICATOR" />
    </mapping>
    <mapping connection="Hyd ELEC1 OVHT">
      <phidget serial="335944" port="43" type="INDICATOR" />
    </mapping>
    <mapping connection="Hyd ELEC2 LP">
      <phidget serial="335944" port="55" type="INDICATOR" />
    </mapping>
    <mapping connection="Hyd ELEC2 OVHT">
      <phidget serial="335944" port="42" type="INDICATOR" />
    </mapping>
    <mapping connection="Hyd ENG1 LP">
      <phidget serial="335944" port="54" type="INDICATOR" />
    </mapping>
    <mapping connection="Hyd ENG2 LP">
      <phidget serial="335944" port="41" type="INDICATOR" />
    </mapping>
    <mapping connection="Off sched descent">
      <phidget serial="335944" port="29" type="INDICATOR" />
    </mapping>
    <mapping connection="Pack L">
      <phidget serial="335944" port="31" type="INDICATOR" />
    </mapping>
    <mapping connection="Pack R">
      <phidget serial="335944" port="30" type="INDICATOR" />
    </mapping>
    <mapping connection="Pressurization auto fail">
      <phidget serial="335944" port="28" type="INDICATOR" />
    </mapping>
    <mapping connection="Ram door full open L">
      <phidget serial="335944" port="46" type="INDICATOR" />
    </mapping>
    <mapping connection="Ram door full open R">
      <phidget serial="335944" port="47" type="INDICATOR" />
    </mapping>
    <mapping connection="tempProbe Heat">
      <phidget serial="335944" port="7" type="INDICATOR" />
    </mapping>
    <mapping connection="WAI L Valve Open">
      <phidget serial="335944" port="52" type="INDICATOR" />
      <phidget serial="335944" port="53" type="INDICATOR" />
    </mapping>
    <mapping connection="WAI R Valve Open">
      <phidget serial="335944" port="26" type="INDICATOR" />
      <phidget serial="335944" port="27" type="INDICATOR" />
    </mapping>
    <mapping connection="Window heat FWD L on">
      <phidget serial="335944" port="45" type="INDICATOR" />
    </mapping>
    <mapping connection="Window heat FWD L overheat">
      <phidget serial="335944" port="20" type="INDICATOR" />
    </mapping>
    <mapping connection="Window heat FWD R on">
      <phidget serial="335944" port="17" type="INDICATOR" />
    </mapping>
    <mapping connection="Window heat FWD R overheat">
      <phidget serial="335944" port="8" type="INDICATOR" />
    </mapping>
    <mapping connection="Window heat Side L on">
      <phidget serial="335944" port="44" type="INDICATOR" />
    </mapping>
    <mapping connection="Window heat Side L overheat">
      <phidget serial="335944" port="21" type="INDICATOR" />
    </mapping>
    <mapping connection="Window heat Side R on">
      <phidget serial="335944" port="16" type="INDICATOR" />
    </mapping>
    <mapping connection="Window heat Side R overheat">
      <phidget serial="335944" port="9" type="INDICATOR" />
    </mapping>
    <mapping connection="Wing-body overheat 1">
      <phidget serial="335944" port="5" type="INDICATOR" />
    </mapping>
    <mapping connection="Wing-body overheat 2">
      <phidget serial="335944" port="0" type="INDICATOR" />
    </mapping>
    <mapping connection="Zone temp AFT CAB">
      <phidget serial="335944" port="15" type="INDICATOR" />
    </mapping>
    <mapping connection="Zone temp CONT CAB">
      <phidget serial="335944" port="13" type="INDICATOR" />
    </mapping>
    <mapping connection="Zone temp FWD CAB">
      <phidget serial="335944" port="14" type="INDICATOR" />
    </mapping>
    <mapping connection="Door Right Fwd Overwing">
      <phidget serial="335944" port="56" type="INDICATOR" />
    </mapping>
    <mapping connection="Cruise alt">
      <pokeys serial="33202" port="260" type="NUMERICAL" />
    </mapping>
    <mapping connection="Land alt">
      <pokeys serial="33202" port="516" type="NUMERICAL" />
    </mapping>
    <mapping connection="Flight alt in encoder">
      <pokeys serial="33202" port="0" type="ENCODER" />
    </mapping>
    <mapping connection="Land alt in encoder">
      <pokeys serial="33202" port="1" type="ENCODER" />
    </mapping>
    <mapping connection="APU">
      <fsuipc serial="16 bit U" portString="0x9004" port="9">
        <calibrator>
          <calibration input="0" output="59" margin="0" />
          <calibration input="1000" output="1012" margin="0" />
          <calibration input="1100" output="1024" margin="0" />
        </calibrator>
      </fsuipc>
    </mapping>
    <mapping connection="Pressure Left">
      <fsuipc serial="16 bit U" portString="0x9000" port="4">
        <calibrator>
          <calibration input="0" output="29" margin="0" />
          <calibration input="40" output="507" margin="0" />
          <calibration input="80" output="986" margin="0" />
        </calibrator>
      </fsuipc>
    </mapping>
    <mapping connection="Fuel Temperature">
      <fsuipc serial="16 bit U" portString="0x9002" port="2">
        <calibrator>
          <calibration input="-56" output="0" margin="0" />
          <calibration input="-40" output="105" margin="0" />
          <calibration input="0" output="531" margin="0" />
          <calibration input="40" output="916" margin="0" />
          <calibration input="56" output="1024" margin="0" />
        </calibrator>
      </fsuipc>
    </mapping>
    <mapping connection="Cabin temperature">
      <pou serial="00180041" port="6" type="GAUGE">
        <calibrator>
          <calibration input="-15" output="0" margin="0" />
          <calibration input="0" output="62" margin="0" />
          <calibration input="20" output="255" margin="0" />
          <calibration input="40" output="435" margin="0" />
          <calibration input="60" output="624" margin="0" />
          <calibration input="80" output="850" margin="0" />
          <calibration input="100" output="1013" margin="0" />
        </calibrator>
      </pou>
    </mapping>
    <mapping connection="Outflow valve position">
      <pou serial="00180041" port="7" type="GAUGE">
        <calibrator>
          <calibration input="0" output="972" margin="0" />
          <calibration input="50" output="502" margin="0" />
          <calibration input="100" output="33" margin="0" />
        </calibrator>
      </pou>
    </mapping>
    <mapping connection="Cabin VSI">
      <pou serial="00180041" port="8" type="GAUGE">
        <calibrator>
          <calibration input="-4000" output="0" margin="0" />
          <calibration input="-3000" output="49" margin="0" />
          <calibration input="-2000" output="132" margin="0" />
          <calibration input="-1000" output="225" margin="0" />
          <calibration input="-500" output="394" margin="0" />
          <calibration input="0" output="528" margin="0" />
          <calibration input="500" output="655" margin="0" />
          <calibration input="1000" output="780" margin="0" />
          <calibration input="2000" output="860" margin="0" />
          <calibration input="3000" output="931" margin="0" />
          <calibration input="4000" output="1016" margin="0" />
        </calibrator>
      </pou>
    </mapping>
    <mapping connection="Air Temp Selector CONT CAB">
      <pokeys serial="33258" port="40" type="SWITCH" />
    </mapping>
    <mapping connection="Air Temp Selector DUCT FWD">
      <pokeys serial="33258" port="39" type="SWITCH" />
    </mapping>
    <mapping connection="Air Temp Selector DUCT AFT">
      <pokeys serial="33258" port="38" type="SWITCH" />
    </mapping>
    <mapping connection="Air Temp Selector CAB FWD">
      <pokeys serial="33258" port="37" type="SWITCH" />
    </mapping>
    <mapping connection="Air Temp Selector CAB AFT">
      <pokeys serial="33258" port="36" type="SWITCH" />
    </mapping>
    <mapping connection="Air Temp Selector R">
      <pokeys serial="33258" port="35" type="SWITCH" />
    </mapping>
    <mapping connection="Air Temp Selector L">
      <pokeys serial="33258" port="34" type="SWITCH" />
    </mapping>
    <mapping connection="ASA A/P Amber Capt">
      <FDS serial="03EA000005F4" port="25" type="INDICATOR" />
    </mapping>
    <mapping connection="Master caution 1">
      <FDS serial="03EA000005F4" port="58" type="INDICATOR" />
    </mapping>
    <mapping connection="ASA A/P Amber F/O">
      <FDS serial="03EA000005F4" port="33" type="INDICATOR" />
    </mapping>
    <mapping connection="ASA A/P Red Capt">
      <FDS serial="03EA000005F4" port="24" type="INDICATOR" />
    </mapping>
    <mapping connection="ASA A/P Red F/O">
      <FDS serial="03EA000005F4" port="32" type="INDICATOR" />
    </mapping>
    <mapping connection="ASA A/T Amber Capt">
      <FDS serial="03EA000005F4" port="27" type="INDICATOR" />
    </mapping>
    <mapping connection="ASA A/T Amber F/O">
      <FDS serial="03EA000005F4" port="35" type="INDICATOR" />
    </mapping>
    <mapping connection="ASA A/T Red Capt">
      <FDS serial="03EA000005F4" port="26" type="INDICATOR" />
    </mapping>
    <mapping connection="ASA A/T Red F/O">
      <FDS serial="03EA000005F4" port="34" type="INDICATOR" />
    </mapping>
    <mapping connection="ASA FMC Capt">
      <FDS serial="03EA000005F4" port="28" type="INDICATOR" />
    </mapping>
    <mapping connection="ASA FMC F/O">
      <FDS serial="03EA000005F4" port="36" type="INDICATOR" />
    </mapping>
    <mapping connection="Below GS CP">
      <FDS serial="03EA000005F4" port="20" type="INDICATOR" />
    </mapping>
    <mapping connection="Fire warning 1">
      <FDS serial="03EA000005F4" port="56" type="INDICATOR" />
    </mapping>
    <mapping connection="Fire warning 2">
      <FDS serial="03EA000005F4" port="41" type="INDICATOR" />
    </mapping>
    <mapping connection="Master caution 2">
      <FDS serial="03EA000005F4" port="40" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn AIR_COND">
      <FDS serial="03EA000005F4" port="51" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn ANTI_ICE">
      <FDS serial="03EA000005F4" port="50" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn APU">
      <FDS serial="03EA000005F4" port="65" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn DOORS">
      <FDS serial="03EA000005F4" port="48" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn ELEC">
      <FDS serial="03EA000005F4" port="66" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn ENG">
      <FDS serial="03EA000005F4" port="53" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn FLT_CONT">
      <FDS serial="03EA000005F4" port="69" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn FUEL">
      <FDS serial="03EA000005F4" port="67" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn HYD">
      <FDS serial="03EA000005F4" port="49" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn IRS">
      <FDS serial="03EA000005F4" port="68" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn OVERHEAD">
      <FDS serial="03EA000005F4" port="52" type="INDICATOR" />
    </mapping>
    <mapping connection="Warn OVHT_DET">
      <FDS serial="03EA000005F4" port="64" type="INDICATOR" />
    </mapping>
    <mapping connection="Anti skid INOP">
      <FDS serial="03EA000005F4" port="5" type="INDICATOR" />
    </mapping>
    <mapping connection="Autobrake disarm">
      <FDS serial="03EA000005F4" port="0" type="INDICATOR" />
    </mapping>
    <mapping connection="Below GS FO">
      <FDS serial="03EA000005F4" port="4" type="INDICATOR" />
    </mapping>
    <mapping connection="Cabin altitude indicator">
      <FDS serial="03EA000005F4" port="19" type="INDICATOR" />
      <FDS serial="03EA000005F4" port="2" type="INDICATOR" />
    </mapping>
    <mapping connection="Gear left">
      <FDS serial="03EA000005F4" port="12" type="INDICATOR" />
    </mapping>
    <mapping connection="Gear left transit">
      <FDS serial="03EA000005F4" port="13" type="INDICATOR" />
    </mapping>
    <mapping connection="Gear nose">
      <FDS serial="03EA000005F4" port="9" type="INDICATOR" />
    </mapping>
    <mapping connection="Gear nose transit">
      <FDS serial="03EA000005F4" port="8" type="INDICATOR" />
    </mapping>
    <mapping connection="Gear right">
      <FDS serial="03EA000005F4" port="10" type="INDICATOR" />
    </mapping>
    <mapping connection="Gear right transit">
      <FDS serial="03EA000005F4" port="11" type="INDICATOR" />
    </mapping>
    <mapping connection="GPWS Inop">
      <FDS serial="03EA000005F4" port="3" type="INDICATOR" />
    </mapping>
    <mapping connection="LE Flap Extend">
      <FDS serial="03EA000005F4" port="6" type="INDICATOR" />
    </mapping>
    <mapping connection="LE Flap Transit">
      <FDS serial="03EA000005F4" port="7" type="INDICATOR" />
    </mapping>
    <mapping connection="Speed brake do not arm">
      <FDS serial="03EA000005F4" port="17" type="INDICATOR" />
    </mapping>
    <mapping connection="Spoiler Armed">
      <FDS serial="03EA000005F4" port="16" type="INDICATOR" />
    </mapping>
    <mapping connection="Spoiler Extend">
      <FDS serial="03EA000005F4" port="1" type="INDICATOR" />
    </mapping>
    <mapping connection="Takeoff config">
      <FDS serial="03EA000005F4" port="18" type="INDICATOR" />
    </mapping>
    <mapping connection="Fire warning 1 Pushed">
      <FDS serial="03EA000005F4" port="42" type="SWITCH" />
    </mapping>
    <mapping connection="Fire warning 2 Pushed">
      <FDS serial="03EA000005F4" port="66" type="SWITCH" />
    </mapping>
    <mapping connection="Master caution 1 Pushed">
      <FDS serial="03EA000005F4" port="43" type="SWITCH" />
    </mapping>
    <mapping connection="Master caution 2 Pushed">
      <FDS serial="03EA000005F4" port="65" type="SWITCH" />
    </mapping>
    <mapping connection="MFD ENG Pushed">
      <FDS serial="03EA000005F4" port="35" type="SWITCH" />
    </mapping>
    <mapping connection="MFD SYS Pushed">
      <FDS serial="03EA000005F4" port="34" type="SWITCH" />
    </mapping>
    <mapping connection="N1 SET AUTO">
      <FDS serial="03EA000005F4" port="90" type="SWITCH" />
    </mapping>
    <mapping connection="N1 SET 1">
      <FDS serial="03EA000005F4" port="89" type="SWITCH" />
    </mapping>
    <mapping connection="N1 SET 2">
      <FDS serial="03EA000005F4" port="88" type="SWITCH" />
    </mapping>
    <mapping connection="N1 SET Both">
      <FDS serial="03EA000005F4" port="91" type="SWITCH" />
    </mapping>
    <mapping connection="ASA A/P reset Capt Pushed">
      <FDS serial="03EA000005F4" port="0" type="SWITCH" />
    </mapping>
    <mapping connection="ASA A/P reset F/O Pushed">
      <FDS serial="03EA000005F4" port="8" type="SWITCH" />
    </mapping>
    <mapping connection="ASA A/T reset Capt Pushed">
      <FDS serial="03EA000005F4" port="1" type="SWITCH" />
    </mapping>
    <mapping connection="ASA A/T reset F/O Pushed">
      <FDS serial="03EA000005F4" port="9" type="SWITCH" />
    </mapping>
    <mapping connection="ASA FMC reset Capt Pushed">
      <FDS serial="03EA000005F4" port="2" type="SWITCH" />
    </mapping>
    <mapping connection="ASA FMC reset F/O Pushed">
      <FDS serial="03EA000005F4" portString="0x0000" port="10" type="SWITCH" />
    </mapping>
    <mapping connection="ASA Test Capt 1">
      <FDS serial="03EA000005F4" port="5" type="SWITCH" />
    </mapping>
    <mapping connection="ASA Test Capt 2">
      <FDS serial="03EA000005F4" port="3" type="SWITCH" />
    </mapping>
    <mapping connection="ASA Test F/O 1">
      <FDS serial="03EA000005F4" port="13" type="SWITCH" />
    </mapping>
    <mapping connection="ASA Test F/O 2">
      <FDS serial="03EA000005F4" port="11" type="SWITCH" />
    </mapping>
    <mapping connection="Autobrake RTO">
      <FDS serial="03EA000005F4" port="24" type="SWITCH" />
    </mapping>
    <mapping connection="Autobrake 1">
      <FDS serial="03EA000005F4" port="26" type="SWITCH" />
    </mapping>
    <mapping connection="Autobrake 2">
      <FDS serial="03EA000005F4" port="27" type="SWITCH" />
    </mapping>
    <mapping connection="Autobrake 3">
      <FDS serial="03EA000005F4" port="29" type="SWITCH" />
    </mapping>
    <mapping connection="Autobrake Max">
      <FDS serial="03EA000005F4" port="29" type="SWITCH" />
    </mapping>
    <mapping connection="Bell cutout Pushed">
      <FDS serial="03EA000005F4" port="42" type="SWITCH" />
    </mapping>
    <mapping connection="Clock Captain Pushed">
      <FDS serial="03EA000005F4" port="40" type="SWITCH" />
    </mapping>
    <mapping connection="Clock F/O Pushed">
      <FDS serial="03EA000005F4" port="67" type="SWITCH" />
    </mapping>
    <mapping connection="Fuel flow Used">
      <FDS serial="03EA000005F4" port="33" type="SWITCH" />
    </mapping>
    <mapping connection="Fuel flow Reset">
      <FDS serial="03EA000005F4" port="32" type="SWITCH" />
    </mapping>
    <mapping connection="Gear Down">
      <FDS serial="03EA000005F4" port="16" type="SWITCH" />
    </mapping>
    <mapping connection="Gear Up">
      <FDS serial="03EA000005F4" port="17" type="SWITCH" />
    </mapping>
    <mapping connection="GPWS Sys test Pushed">
      <FDS serial="03EA000005F4" port="68" type="SWITCH" />
    </mapping>
    <mapping connection="Light Test Test">
      <FDS serial="03EA000005F4" port="37" type="SWITCH" />
    </mapping>
    <mapping connection="Lower DU Capt Norm">
      <FDS serial="03EA000005F4" port="53" type="SWITCH" />
    </mapping>
    <mapping connection="Lower DU Capt ND">
      <FDS serial="03EA000005F4" port="55" type="SWITCH" />
    </mapping>
    <mapping connection="Lower DU Capt Eng Pri">
      <FDS serial="03EA000005F4" port="54" type="SWITCH" />
    </mapping>
    <mapping connection="Lower DU FO Norm">
      <FDS serial="03EA000005F4" port="62" type="SWITCH" />
    </mapping>
    <mapping connection="Lower DU FO ND">
      <FDS serial="03EA000005F4" port="61" type="SWITCH" />
    </mapping>
    <mapping connection="Lower DU FO Eng Pri">
      <FDS serial="03EA000005F4" port="63" type="SWITCH" />
    </mapping>
    <mapping connection="Main Panel DUs Capt Norm">
      <FDS serial="03EA000005F4" port="49" type="SWITCH" />
    </mapping>
    <mapping connection="Main Panel DUs Capt Outbd PFD">
      <FDS serial="03EA000005F4" port="48" type="SWITCH" />
    </mapping>
    <mapping connection="Main Panel DUs Capt Eng Pri">
      <FDS serial="03EA000005F4" port="50" type="SWITCH" />
    </mapping>
    <mapping connection="Main Panel DUs Capt PFD">
      <FDS serial="03EA000005F4" port="51" type="SWITCH" />
    </mapping>
    <mapping connection="Main Panel DUs Capt MFD">
      <FDS serial="03EA000005F4" port="52" type="SWITCH" />
    </mapping>
    <mapping connection="Main Panel DUs FO Norm">
      <FDS serial="03EA000005F4" port="59" type="SWITCH" />
    </mapping>
    <mapping connection="Main Panel DUs FO Outbd PFD">
      <FDS serial="03EA000005F4" port="61" type="SWITCH" />
    </mapping>
    <mapping connection="Main Panel DUs FO Eng Pri">
      <FDS serial="03EA000005F4" port="58" type="SWITCH" />
    </mapping>
    <mapping connection="Main Panel DUs FO PFD">
      <FDS serial="03EA000005F4" port="57" type="SWITCH" />
    </mapping>
    <mapping connection="Main Panel DUs FO MFD">
      <FDS serial="03EA000005F4" port="56" type="SWITCH" />
    </mapping>
    <mapping connection="Recall 1 Pushed">
      <FDS serial="03EA000005F4" port="41" type="SWITCH" />
    </mapping>
    <mapping connection="Recall 2 Pushed">
      <FDS serial="03EA000005F4" port="64" type="SWITCH" />
    </mapping>
    <mapping connection="SPD REF AUTO">
      <FDS serial="03EA000005F4" port="81" type="SWITCH" />
    </mapping>
    <mapping connection="SPD REF V1">
      <FDS serial="03EA000005F4" port="81" type="SWITCH" />
    </mapping>
    <mapping connection="SPD REF VR">
      <FDS serial="03EA000005F4" port="82" type="SWITCH" />
    </mapping>
    <mapping connection="SPD REF WT">
      <FDS serial="03EA000005F4" port="83" type="SWITCH" />
    </mapping>
    <mapping connection="SPD REF VREF">
      <FDS serial="03EA000005F4" port="84" type="SWITCH" />
    </mapping>
    <mapping connection="SPD REF BUG">
      <FDS serial="03EA000005F4" port="85" type="SWITCH" />
    </mapping>
    <mapping connection="SPD REF SET">
      <FDS serial="03EA000005F4" port="86" type="SWITCH" />
    </mapping>
    <mapping connection="Flap right">
      <pou serial="00072095" port="5" type="GAUGE">
        <calibrator>
          <calibration input="0" output="33" margin="0" />
          <calibration input="1" output="118" margin="0" />
          <calibration input="2" output="272" margin="0" />
          <calibration input="3" output="387" margin="0" />
          <calibration input="4" output="543" margin="0" />
          <calibration input="5" output="643" margin="0" />
          <calibration input="6" output="768" margin="0" />
          <calibration input="7" output="875" margin="0" />
          <calibration input="8" output="998" margin="0" />
        </calibrator>
      </pou>
    </mapping>
    <mapping connection="Flap inhibit Norm">
      <FDS serial="03EA000005F4" port="74" type="SWITCH" />
    </mapping>
    <mapping connection="Gear inhibit Norm">
      <FDS serial="03EA000005F4" port="76" type="SWITCH" />
    </mapping>
    <mapping connection="Terrain inhibit Norm">
      <FDS serial="03EA000005F4" port="78" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon 737 APU start input Active">
      <gateInput serial="" port="622" />
    </mapping>
    <mapping connection="Audio addon 737 BATTERY ON input Active">
      <gateInput serial="" port="620" />
    </mapping>
    <mapping connection="Audio addon START REACT 1 input Active">
      <gateInput serial="" port="683" />
    </mapping>
    <mapping connection="Audio addon START REACT 2 input Active">
      <gateInput serial="" port="684" />
    </mapping>
    <mapping connection="Audio addon PACK1 input Active">
      <gateInput serial="" port="679" />
    </mapping>
    <mapping connection="Audio addon PACK2 input Active">
      <gateInput serial="" port="680" />
    </mapping>
    <mapping connection="Audio addon RECYC 1 input Active">
      <gateInput serial="" port="677" />
    </mapping>
    <mapping connection="Audio addon RECYC 2 input Active">
      <gateInput serial="" port="678" />
    </mapping>
    <mapping connection="Audio addon FUEL PUMP 1 input Active">
      <gateInput serial="" port="627" />
    </mapping>
    <mapping connection="Audio addon FUEL PUMP 2 input Active">
      <gateInput serial="" port="627" />
    </mapping>
    <mapping connection="Audio addon FUEL PUMP 3 input Active">
      <gateInput serial="" port="627" />
    </mapping>
    <mapping connection="Audio addon FUEL PUMP 4 input Active">
      <gateInput serial="" port="627" />
    </mapping>
    <mapping connection="Audio addon FUEL PUMP 5 input Active">
      <gateInput serial="" port="627" />
    </mapping>
    <mapping connection="Audio addon FUEL PUMP 6 input Active">
      <gateInput serial="" port="627" />
    </mapping>
    <mapping connection="Audio addon 737   V2 input Active">
      <gateInput serial="" port="675" />
    </mapping>
    <mapping connection="Audio addon 737   VR input Active">
      <gateInput serial="" port="674" />
    </mapping>
    <mapping connection="Starter 1 pushback solenoid">
      <iocp serial="0" port="1362" />
    </mapping>
    <mapping connection="Starter 2 pushback solenoid">
      <iocp serial="0" port="1365" />
    </mapping>
    <mapping connection="Yaw damper gauge">
      <pou serial="00072095" port="4" type="GAUGE">
        <calibrator>
          <calibration input="-10" output="228" margin="0" />
          <calibration input="0" output="525" margin="0" />
          <calibration input="10" output="922" margin="0" />
        </calibrator>
      </pou>
    </mapping>
    <mapping connection="Emer Exit Lights Armed">
      <pokeys serial="33202" port="45" type="SWITCH" />
    </mapping>
    <mapping connection="Alternate flaps Off">
      <pokeys serial="33261" port="33" type="SWITCH" />
    </mapping>
    <mapping connection="Autobrake Off">
      <FDS serial="03EA000005F4" port="25" type="SWITCH" />
    </mapping>
    <mapping connection="Pack 1 Off">
      <pokeys serial="33258" port="45" type="SWITCH" />
    </mapping>
    <mapping connection="Pack 2 Off">
      <pokeys serial="33258" port="44" type="SWITCH" />
    </mapping>
    <mapping connection="Seatbelt Off">
      <pokeys serial="33202" port="38" type="SWITCH" />
    </mapping>
    <mapping connection="Pack 1 High">
      <pokeys serial="33258" port="52" type="SWITCH" />
    </mapping>
    <mapping connection="Pack 2 High">
      <pokeys serial="33258" port="50" type="SWITCH" />
    </mapping>
    <mapping connection="Pneumatic Isolation switch Close">
      <pokeys serial="33258" port="13" type="SWITCH" />
    </mapping>
    <mapping connection="Nose wheel steering Alternate">
      <FDS serial="03EA000005F4" port="114" type="SWITCH" />
    </mapping>
    <mapping connection="Fuel cutoff left Cutoff">
      <FDS serial="03EA000005F4" port="113" type="SWITCH" />
    </mapping>
    <mapping connection="Fuel cutoff right Cutoff">
      <FDS serial="03EA000005F4" port="112" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon PACK L input Active">
      <gateInput serial="" port="696" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon PACK R input Active">
      <gateInput serial="" port="697" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon 737 Avionics input Active">
      <gateInput serial="" port="621" />
    </mapping>
    <mapping connection="Audio addon FO  V1 input Active">
      <gateInput serial="" port="673" />
    </mapping>
    <mapping connection="Audio addon FO  V2 input Active">
      <gateInput serial="" port="675" />
    </mapping>
    <mapping connection="Audio addon FO  VR input Active">
      <gateInput serial="" port="674" />
    </mapping>
    <mapping connection="Audio addon FO  80 KTS input Active">
      <gateInput serial="" port="693" type="SWITCH" />
    </mapping>
    <mapping connection="Lights Strobe On">
      <pokeys serial="33261" port="44" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon Prosim navionics input Active">
      <gateInput serial="" port="620" />
    </mapping>
    <mapping connection="Audio addon Prosim_V1 input Active">
      <gateInput serial="" port="690" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon Prosim_V2 input Active">
      <gateInput serial="" port="692" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon Prosim_VR input Active">
      <gateInput serial="" port="691" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon APU Running input Active">
      <gateInput serial="" port="623" />
    </mapping>
    <mapping connection="Audio addon APU STOP input Active">
      <gateInput serial="" port="639" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon SPEEDBRAKE input Active">
      <gateInput serial="" port="669" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon Hydraulic 1 input Active">
      <gateInput serial="" port="626" />
    </mapping>
    <mapping connection="Audio addon BATTERY power on input Active">
      <gateInput serial="" port="636" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon 737 HYDRAULIQUE 2 input Active">
      <gateInput serial="" port="627" />
    </mapping>
    <mapping connection="Audio addon Hydraulic A input Active">
      <gateInput serial="" port="641" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon Hydraulic B input Active">
      <gateInput serial="" port="642" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon L Recirc Fan input Active">
      <gateInput serial="" port="677" />
    </mapping>
    <mapping connection="Audio addon R Recirc Fan input Active">
      <gateInput serial="" port="678" />
    </mapping>
    <mapping connection="Audio addon VorLoc  o bip input Active">
      <gateInput serial="" port="637" />
    </mapping>
    <mapping connection="Audio addon VorLoc I bip input Active">
      <gateInput serial="" port="639" />
    </mapping>
    <mapping connection="Audio addon VorLoc M bip input Active">
      <gateInput serial="" port="638" />
    </mapping>
    <mapping connection="Audio addon 737 Fuel 1 input Active">
      <gateInput serial="" port="626" />
    </mapping>
    <mapping connection="Audio addon 737  Fuel 2 input Active">
      <s'ystem serial="" port="0" />
    </mapping>
    <mapping connection="Audio addon 737 Fuel 3 input Active">
      <s'ystem serial="" port="0" />
    </mapping>
    <mapping connection="Audio addon 737 Fuel 4 input Active">
      <s'ystem serial="" port="0" />
    </mapping>
    <mapping connection="Audio addon 737 Fuel 5 input Active">
      <s'ystem serial="" port="0" />
    </mapping>
    <mapping connection="Audio addon 737 Fuel 6 input Active">
      <s'ystem serial="" port="0" />
    </mapping>
    <mapping connection="Cabin alt audio">
      <internal serial="" port="0" />
    </mapping>
    <mapping connection="auxPitot Heat">
      <phidget serial="335944" port="19" type="INDICATOR" />
    </mapping>
    <mapping connection="Audio addon Avionics input Active">
      <gateInput serial="" port="621" />
    </mapping>
    <mapping connection="Audio addon User 1 out 737 Fuel 1 input Active">
      <gateInput serial="" port="621" />
    </mapping>
    <mapping connection="Audio addon APU start input Active">
      <gateInput serial="" port="637" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon TRIM DOWN input Active">
      <gateInput serial="" port="707" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon TRIM UP input Active">
      <gateInput serial="" port="706" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon nchime input Active">
      <gateInput serial="" port="713" type="SWITCH" />
    </mapping>
    <mapping connection="Brake pressure">
      <pou serial="00072095" port="3" type="GAUGE">
        <calibrator>
          <calibration input="0" output="39" margin="0" />
          <calibration input="1000" output="273" margin="0" />
          <calibration input="2000" output="507" margin="0" />
          <calibration input="3000" output="760" margin="0" />
          <calibration input="4000" output="977" margin="0" />
        </calibrator>
      </pou>
    </mapping>
    <mapping connection="Emer Exit Lights On">
      <pokeys serial="33202" port="45" type="SWITCH" />
    </mapping>
    <mapping connection="Lights Position Off">
      <pokeys serial="33261" port="45" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon B737 APU GEN RUN input Active">
      <gateInput serial="" port="638" type="SWITCH" />
    </mapping>
    <mapping connection="Weather Radar Mode WX+T">
      <pokeys serial="34064" port="36" type="SWITCH" />
    </mapping>
    <mapping connection="Weather Radar Mode WX">
      <pokeys serial="34064" port="37" type="SWITCH" />
    </mapping>
    <mapping connection="Weather Radar Mode MAP">
      <pokeys serial="34064" port="35" type="SWITCH" />
    </mapping>
    <mapping connection="Weather Radar Mode TEST">
      <pokeys serial="34064" port="38" type="SWITCH" />
    </mapping>
    <mapping connection="Weather Radar Gain">
      <pokeys serial="34064" port="40" type="ANALOG" />
    </mapping>
    <mapping connection="Weather Radar Tilt">
      <pokeys serial="34064" port="41" type="ANALOG" />
    </mapping>
    <mapping connection="Audio addon Spoiler DN input Active">
      <gateInput serial="" port="685" />
    </mapping>
    <mapping connection="Audio addon Spoiler UP input Active">
      <gateInput serial="" port="678" />
    </mapping>
    <mapping connection="AP Disconnect Yoke Capt Pushed">
      <directinput serial="7a5b8450-a6a9-11e5-8004-444553540000" port="4" type="SWITCH" />
    </mapping>
    <mapping connection="ELT Armed">
      <pokeys serial="34055" port="31" type="SWITCH" />
    </mapping>
    <mapping connection="ELT On">
      <pokeys serial="34055" port="30" type="SWITCH" />
    </mapping>
    <mapping connection="Flight recorder Normal">
      <pokeys serial="34055" port="35" type="SWITCH" />
    </mapping>
    <mapping connection="Flight recorder Test">
      <pokeys serial="34055" port="34" type="SWITCH" />
    </mapping>
    <mapping connection="IRS Disp Sel TK/GS">
      <pokeys serial="34055" port="39" type="SWITCH" />
    </mapping>
    <mapping connection="IRS Disp Sel Test">
      <pokeys serial="34055" port="38" type="SWITCH" />
    </mapping>
    <mapping connection="IRS Disp Sel PPOS">
      <pokeys serial="34055" port="40" type="SWITCH" />
    </mapping>
    <mapping connection="IRS Disp Sel Wind">
      <pokeys serial="34055" port="41" type="SWITCH" />
    </mapping>
    <mapping connection="IRS Disp Sel HDG/STS">
      <pokeys serial="34055" port="42" type="SWITCH" />
    </mapping>
    <mapping connection="IRS left Nav">
      <pokeys serial="34055" port="50" type="SWITCH" />
    </mapping>
    <mapping connection="IRS left Off">
      <pokeys serial="34055" port="52" type="SWITCH" />
    </mapping>
    <mapping connection="IRS left Align">
      <pokeys serial="34055" port="51" type="SWITCH" />
    </mapping>
    <mapping connection="IRS left Att">
      <pokeys serial="34055" port="49" type="SWITCH" />
    </mapping>
    <mapping connection="IRS right Nav">
      <pokeys serial="34055" port="46" type="SWITCH" />
    </mapping>
    <mapping connection="IRS right Off">
      <pokeys serial="34055" port="48" type="SWITCH" />
    </mapping>
    <mapping connection="IRS right Align">
      <pokeys serial="34055" port="47" type="SWITCH" />
    </mapping>
    <mapping connection="IRS right Att">
      <pokeys serial="34055" port="45" type="SWITCH" />
    </mapping>
    <mapping connection="IRS SYS DSPL Left">
      <pokeys serial="34055" port="36" type="SWITCH" />
    </mapping>
    <mapping connection="IRS SYS DSPL Right">
      <pokeys serial="34055" port="37" type="SWITCH" />
    </mapping>
    <mapping connection="LE Devices test Pushed">
      <pokeys serial="34055" port="54" type="SWITCH" />
    </mapping>
    <mapping connection="Mach Airspeed warning test no1 Pushed">
      <pokeys serial="34055" port="16" type="SWITCH" />
    </mapping>
    <mapping connection="Mach Airspeed warning test no2 Pushed">
      <pokeys serial="34055" port="17" type="SWITCH" />
    </mapping>
    <mapping connection="Pass oxygen Normal">
      <pokeys serial="34055" port="32" type="SWITCH" />
    </mapping>
    <mapping connection="Pass oxygen On">
      <pokeys serial="34055" port="33" type="SWITCH" />
    </mapping>
    <mapping connection="Stall test 1 Pushed">
      <pokeys serial="34055" port="18" type="SWITCH" />
    </mapping>
    <mapping connection="Stall test 2 Pushed">
      <pokeys serial="34055" port="19" type="SWITCH" />
    </mapping>
    <mapping connection="EEC Altn left">
      <pokeys serial="36945" port="50" type="INDICATOR" />
    </mapping>
    <mapping connection="EEC Altn right">
      <pokeys serial="36945" port="15" type="INDICATOR" />
    </mapping>
    <mapping connection="EEC On left">
      <pokeys serial="36945" port="49" type="INDICATOR" />
    </mapping>
    <mapping connection="EEC On right">
      <pokeys serial="36945" port="16" type="INDICATOR" />
    </mapping>
    <mapping connection="ELT">
      <pokeys serial="34055" port="0" type="INDICATOR" />
    </mapping>
    <mapping connection="Engine control left">
      <pokeys serial="36945" port="44" type="INDICATOR" />
    </mapping>
    <mapping connection="Engine control right">
      <pokeys serial="36945" port="43" type="INDICATOR" />
    </mapping>
    <mapping connection="Flaps extended 1">
      <pokeys serial="36945" port="36" type="INDICATOR" />
      <pokeys serial="36945" port="19" type="INDICATOR" />
    </mapping>
    <mapping connection="Flaps extended 2">
      <pokeys serial="36945" port="37" type="INDICATOR" />
      <pokeys serial="36945" port="20" type="INDICATOR" />
    </mapping>
    <mapping connection="Flaps extended 3">
      <pokeys serial="36945" port="47" type="INDICATOR" />
      <pokeys serial="36945" port="21" type="INDICATOR" />
    </mapping>
    <mapping connection="Flaps extended 4">
      <pokeys serial="36945" port="48" type="INDICATOR" />
      <pokeys serial="36945" port="25" type="INDICATOR" />
    </mapping>
    <mapping connection="Flaps transit 1">
      <pokeys serial="36945" port="31" type="INDICATOR" />
    </mapping>
    <mapping connection="Flaps transit 2">
      <pokeys serial="36945" port="30" type="INDICATOR" />
    </mapping>
    <mapping connection="Flaps transit 3">
      <pokeys serial="36945" port="2" type="INDICATOR" />
    </mapping>
    <mapping connection="Flaps transit 4">
      <pokeys serial="36945" port="0" type="INDICATOR" />
    </mapping>
    <mapping connection="Flight recorder off">
      <pokeys serial="36945" port="42" type="INDICATOR" />
    </mapping>
    <mapping connection="Gear left aft oh">
      <pokeys serial="34055" port="2" type="INDICATOR" />
    </mapping>
    <mapping connection="Gear nose aft ovh">
      <pokeys serial="34055" port="1" type="INDICATOR" />
    </mapping>
    <mapping connection="Gear right aft ovh">
      <pokeys serial="34055" port="3" type="INDICATOR" />
    </mapping>
    <mapping connection="GPS">
      <pokeys serial="34055" port="15" type="INDICATOR" />
    </mapping>
    <mapping connection="IRS left align">
      <pokeys serial="34055" port="11" type="INDICATOR" />
    </mapping>
    <mapping connection="IRS left DC Fail">
      <pokeys serial="34055" port="4" type="INDICATOR" />
    </mapping>
    <mapping connection="IRS left Fault">
      <pokeys serial="34055" port="5" type="INDICATOR" />
    </mapping>
    <mapping connection="IRS left On DC">
      <pokeys serial="34055" port="12" type="INDICATOR" />
    </mapping>
    <mapping connection="IRS right align">
      <pokeys serial="34055" port="13" type="INDICATOR" />
    </mapping>
    <mapping connection="IRS right DC Fail">
      <pokeys serial="34055" port="7" type="INDICATOR" />
    </mapping>
    <mapping connection="IRS right Fault">
      <pokeys serial="34055" port="6" type="INDICATOR" />
    </mapping>
    <mapping connection="IRS right On DC">
      <pokeys serial="34055" port="14" type="INDICATOR" />
    </mapping>
    <mapping connection="Pass oxy on">
      <pokeys serial="36945" port="51" type="INDICATOR" />
    </mapping>
    <mapping connection="PSEU">
      <pokeys serial="36945" port="52" type="INDICATOR" />
    </mapping>
    <mapping connection="Reverser left">
      <pokeys serial="36945" port="38" type="INDICATOR" />
    </mapping>
    <mapping connection="Reverser right">
      <pokeys serial="36945" port="39" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats extended 1">
      <pokeys serial="36945" port="11" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats extended 2">
      <pokeys serial="36945" port="12" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats extended 3">
      <pokeys serial="36945" port="14" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats extended 4">
      <pokeys serial="36945" port="13" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats extended 5">
      <pokeys serial="36945" port="6" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats extended 6">
      <pokeys serial="36945" port="7" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats extended 7">
      <pokeys serial="36945" port="40" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats extended 8">
      <pokeys serial="36945" port="41" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats fullExtended 1">
      <pokeys serial="36945" port="45" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats fullExtended 2">
      <pokeys serial="36945" port="46" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats fullExtended 3">
      <pokeys serial="36945" port="17" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats fullExtended 4">
      <pokeys serial="36945" port="18" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats fullExtended 5">
      <pokeys serial="36945" port="26" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats fullExtended 6">
      <pokeys serial="36945" port="27" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats fullExtended 7">
      <pokeys serial="36945" port="28" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats fullExtended 8">
      <pokeys serial="36945" port="29" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats transit 1">
      <pokeys serial="36945" port="35" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats transit 2">
      <pokeys serial="36945" port="34" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats transit 3">
      <pokeys serial="36945" port="33" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats transit 4">
      <pokeys serial="36945" port="32" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats transit 5">
      <pokeys serial="36945" port="1" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats transit 6">
      <pokeys serial="36945" port="3" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats transit 7">
      <pokeys serial="36945" port="4" type="INDICATOR" />
    </mapping>
    <mapping connection="Slats transit 8">
      <pokeys serial="36945" port="5" type="INDICATOR" />
    </mapping>
    <mapping connection="IRS Display left number">
      <pokeys serial="36945" port="517" type="NUMERICAL" />
    </mapping>
    <mapping connection="IRS Display right number">
      <pokeys serial="36945" port="261" type="NUMERICAL" />
    </mapping>
    <mapping connection="Oxygen pressure">
      <pou serial="00180041" port="0" type="GAUGE">
        <calibrator>
          <calibration input="0" output="0" margin="0" />
          <calibration input="5" output="296" margin="0" />
          <calibration input="10" output="473" margin="0" />
          <calibration input="15" output="746" margin="0" />
          <calibration input="20" output="1022" margin="0" />
        </calibrator>
      </pou>
    </mapping>
    <mapping connection="Pressure differential">
      <pou serial="00180041" port="1" type="GAUGE">
        <calibrator>
          <calibration input="0" output="39" margin="0" />
          <calibration input="1" output="123" margin="0" />
          <calibration input="2" output="193" margin="0" />
          <calibration input="3" output="300" margin="0" />
          <calibration input="8" output="793" margin="0" />
          <calibration input="10" output="1024" margin="0" />
        </calibrator>
      </pou>
    </mapping>
    <mapping connection="Audio addon L Recirc Fan L input Active">
      <gateInput serial="" port="694" type="SWITCH" />
    </mapping>
    <mapping connection="Audio addon R Recirc Fan R input Active">
      <gateInput serial="" port="695" type="SWITCH" />
    </mapping>
    <mapping connection="ADF1 mode switch Off" />
    <mapping connection="ADF1 mode switch Antenna" />
    <mapping connection="ADF1 mode switch ADF" />
    <mapping connection="ADF1 tone Off" />
    <mapping connection="ADF1 tone On" />
    <mapping connection="ADF2 mode switch Off" />
    <mapping connection="ADF2 mode switch Antenna" />
    <mapping connection="ADF2 mode switch ADF" />
    <mapping connection="ADF2 tone Off" />
    <mapping connection="ADF2 tone On" />
    <mapping connection="Aileron trim Center" />
    <mapping connection="Aileron trim Left" />
    <mapping connection="Aileron trim Right" />
    <mapping connection="Alt horn cutout Off" />
    <mapping connection="Alternate flaps Arm" />
    <mapping connection="Alternate flaps ctrl Off" />
    <mapping connection="APU GEN 1 Center" />
    <mapping connection="APU GEN 1 Off" />
    <mapping connection="APU GEN 2 Center" />
    <mapping connection="APU GEN 2 Off" />
    <mapping connection="APU switch On" />
    <mapping connection="ASA A/P reset Capt Off" />
    <mapping connection="ASA A/P reset F/O Off" />
    <mapping connection="ASA A/T reset Capt Off" />
    <mapping connection="ASA A/T reset F/O Off" />
    <mapping connection="ASA FMC reset Capt Off" />
    <mapping connection="ASA FMC reset F/O Off" />
    <mapping connection="ASA Test Capt Off" />
    <mapping connection="ASA Test F/O Off" />
    <mapping connection="ASP ADF 1 vol Off" />
    <mapping connection="ASP ADF 1 vol Pushed" />
    <mapping connection="ASP ADF 1 vol latch Off" />
    <mapping connection="ASP ADF 1 vol latch On" />
    <mapping connection="ASP ADF 2 vol Off" />
    <mapping connection="ASP ADF 2 vol Pushed" />
    <mapping connection="ASP ADF 2 vol latch Off" />
    <mapping connection="ASP ADF 2 vol latch On" />
    <mapping connection="ASP Alternate Selected Off" />
    <mapping connection="ASP Alternate Selected On" />
    <mapping connection="ASP Boom Selected Off" />
    <mapping connection="ASP Boom Selected On" />
    <mapping connection="ASP filter mode B" />
    <mapping connection="ASP filter mode V" />
    <mapping connection="ASP filter mode R" />
    <mapping connection="ASP FLT vol Off" />
    <mapping connection="ASP FLT vol Pushed" />
    <mapping connection="ASP FLT vol latch Off" />
    <mapping connection="ASP FLT vol latch On" />
    <mapping connection="ASP FLT vol send Normal" />
    <mapping connection="ASP FLT vol send Pushed" />
    <mapping connection="ASP FO ADF 1 vol Off" />
    <mapping connection="ASP FO ADF 1 vol Pushed" />
    <mapping connection="ASP FO ADF 1 vol latch Off" />
    <mapping connection="ASP FO ADF 1 vol latch On" />
    <mapping connection="ASP FO ADF 2 vol Off" />
    <mapping connection="ASP FO ADF 2 vol Pushed" />
    <mapping connection="ASP FO ADF 2 vol latch Off" />
    <mapping connection="ASP FO ADF 2 vol latch On" />
    <mapping connection="ASP FO Alternate Selected Off" />
    <mapping connection="ASP FO Alternate Selected On" />
    <mapping connection="ASP FO Boom Selected Off" />
    <mapping connection="ASP FO Boom Selected On" />
    <mapping connection="ASP FO FLT vol Off" />
    <mapping connection="ASP FO FLT vol Pushed" />
    <mapping connection="ASP FO FLT vol latch Off" />
    <mapping connection="ASP FO FLT vol latch On" />
    <mapping connection="ASP FO FLT vol send Normal" />
    <mapping connection="ASP FO FLT vol send Pushed" />
    <mapping connection="ASP FO HF 1 Off" />
    <mapping connection="ASP FO HF 1 Pushed" />
    <mapping connection="ASP FO HF 1 latch Off" />
    <mapping connection="ASP FO HF 1 latch On" />
    <mapping connection="ASP FO HF 1 send Normal" />
    <mapping connection="ASP FO HF 1 send Pushed" />
    <mapping connection="ASP FO HF 2 Off" />
    <mapping connection="ASP FO HF 2 Pushed" />
    <mapping connection="ASP FO HF 2 latch Off" />
    <mapping connection="ASP FO HF 2 latch On" />
    <mapping connection="ASP FO HF 2 send Normal" />
    <mapping connection="ASP FO HF 2 send Pushed" />
    <mapping connection="ASP FO IC Selected Off" />
    <mapping connection="ASP FO IC Selected On" />
    <mapping connection="ASP FO Marker vol Off" />
    <mapping connection="ASP FO Marker vol Pushed" />
    <mapping connection="ASP FO Marker vol latch Off" />
    <mapping connection="ASP FO Marker vol latch On" />
    <mapping connection="ASP FO Mask Selected Off" />
    <mapping connection="ASP FO Mask Selected On" />
    <mapping connection="ASP FO NAV 1 vol Off" />
    <mapping connection="ASP FO NAV 1 vol Pushed" />
    <mapping connection="ASP FO NAV 1 vol latch Off" />
    <mapping connection="ASP FO NAV 1 vol latch On" />
    <mapping connection="ASP FO NAV 2 vol Off" />
    <mapping connection="ASP FO NAV 2 vol Pushed" />
    <mapping connection="ASP FO NAV 2 vol latch Off" />
    <mapping connection="ASP FO NAV 2 vol latch On" />
    <mapping connection="ASP FO Normal Selected Off" />
    <mapping connection="ASP FO Normal Selected On" />
    <mapping connection="ASP FO PA vol Off" />
    <mapping connection="ASP FO PA vol Pushed" />
    <mapping connection="ASP FO PA vol latch Off" />
    <mapping connection="ASP FO PA vol latch On" />
    <mapping connection="ASP FO PA vol send Normal" />
    <mapping connection="ASP FO PA vol send Pushed" />
    <mapping connection="ASP FO RT Selected Off" />
    <mapping connection="ASP FO RT Selected On" />
    <mapping connection="ASP FO Spkr vol Off" />
    <mapping connection="ASP FO Spkr vol Pushed" />
    <mapping connection="ASP FO Spkr vol latch Off" />
    <mapping connection="ASP FO Spkr vol latch On" />
    <mapping connection="ASP FO SVC vol Off" />
    <mapping connection="ASP FO SVC vol Pushed" />
    <mapping connection="ASP FO SVC vol latch Off" />
    <mapping connection="ASP FO SVC vol latch On" />
    <mapping connection="ASP FO SVC vol send Normal" />
    <mapping connection="ASP FO SVC vol send Pushed" />
    <mapping connection="ASP FO VHF 1 vol Off" />
    <mapping connection="ASP FO VHF 1 vol Pushed" />
    <mapping connection="ASP FO VHF 1 vol latch Off" />
    <mapping connection="ASP FO VHF 1 vol latch On" />
    <mapping connection="ASP FO VHF 1 vol send Normal" />
    <mapping connection="ASP FO VHF 1 vol send Pushed" />
    <mapping connection="ASP FO VHF 2 vol Off" />
    <mapping connection="ASP FO VHF 2 vol Pushed" />
    <mapping connection="ASP FO VHF 2 vol latch Off" />
    <mapping connection="ASP FO VHF 2 vol latch On" />
    <mapping connection="ASP FO VHF 2 vol send Normal" />
    <mapping connection="ASP FO VHF 2 vol send Pushed" />
    <mapping connection="ASP FO VHF 3 vol Off" />
    <mapping connection="ASP FO VHF 3 vol Pushed" />
    <mapping connection="ASP FO VHF 3 vol latch Off" />
    <mapping connection="ASP FO VHF 3 vol latch On" />
    <mapping connection="ASP FO VHF 3 vol send Normal" />
    <mapping connection="ASP FO VHF 3 vol send Pushed" />
    <mapping connection="ASP HF 1 Off" />
    <mapping connection="ASP HF 1 Pushed" />
    <mapping connection="ASP HF 1 latch Off" />
    <mapping connection="ASP HF 1 latch On" />
    <mapping connection="ASP HF 1 send Normal" />
    <mapping connection="ASP HF 1 send Pushed" />
    <mapping connection="ASP HF 2 Off" />
    <mapping connection="ASP HF 2 Pushed" />
    <mapping connection="ASP HF 2 latch Off" />
    <mapping connection="ASP HF 2 latch On" />
    <mapping connection="ASP HF 2 send Normal" />
    <mapping connection="ASP HF 2 send Pushed" />
    <mapping connection="ASP IC Selected Off" />
    <mapping connection="ASP IC Selected On" />
    <mapping connection="ASP Marker vol Off" />
    <mapping connection="ASP Marker vol Pushed" />
    <mapping connection="ASP Marker vol latch Off" />
    <mapping connection="ASP Marker vol latch On" />
    <mapping connection="ASP Mask Selected Off" />
    <mapping connection="ASP Mask Selected On" />
    <mapping connection="ASP NAV 1 vol Off" />
    <mapping connection="ASP NAV 1 vol Pushed" />
    <mapping connection="ASP NAV 1 vol latch Off" />
    <mapping connection="ASP NAV 1 vol latch On" />
    <mapping connection="ASP NAV 2 vol Off" />
    <mapping connection="ASP NAV 2 vol Pushed" />
    <mapping connection="ASP NAV 2 vol latch Off" />
    <mapping connection="ASP NAV 2 vol latch On" />
    <mapping connection="ASP Normal Selected Off" />
    <mapping connection="ASP Normal Selected On" />
    <mapping connection="ASP OBS ADF 1 vol Off" />
    <mapping connection="ASP OBS ADF 1 vol Pushed" />
    <mapping connection="ASP OBS ADF 1 vol latch Off" />
    <mapping connection="ASP OBS ADF 1 vol latch On" />
    <mapping connection="ASP OBS ADF 2 vol Off" />
    <mapping connection="ASP OBS ADF 2 vol Pushed" />
    <mapping connection="ASP OBS ADF 2 vol latch Off" />
    <mapping connection="ASP OBS ADF 2 vol latch On" />
    <mapping connection="ASP OBS Alternate Selected Off" />
    <mapping connection="ASP OBS Alternate Selected On" />
    <mapping connection="ASP OBS Boom Selected Off" />
    <mapping connection="ASP OBS Boom Selected On" />
    <mapping connection="ASP OBS FLT vol Off" />
    <mapping connection="ASP OBS FLT vol Pushed" />
    <mapping connection="ASP OBS FLT vol latch Off" />
    <mapping connection="ASP OBS FLT vol latch On" />
    <mapping connection="ASP OBS FLT vol send Normal" />
    <mapping connection="ASP OBS FLT vol send Pushed" />
    <mapping connection="ASP OBS HF 1 Off" />
    <mapping connection="ASP OBS HF 1 Pushed" />
    <mapping connection="ASP OBS HF 1 latch Off" />
    <mapping connection="ASP OBS HF 1 latch On" />
    <mapping connection="ASP OBS HF 1 send Normal" />
    <mapping connection="ASP OBS HF 1 send Pushed" />
    <mapping connection="ASP OBS HF 2 Off" />
    <mapping connection="ASP OBS HF 2 Pushed" />
    <mapping connection="ASP OBS HF 2 latch Off" />
    <mapping connection="ASP OBS HF 2 latch On" />
    <mapping connection="ASP OBS HF 2 send Normal" />
    <mapping connection="ASP OBS HF 2 send Pushed" />
    <mapping connection="ASP OBS IC Selected Off" />
    <mapping connection="ASP OBS IC Selected On" />
    <mapping connection="ASP OBS Marker vol Off" />
    <mapping connection="ASP OBS Marker vol Pushed" />
    <mapping connection="ASP OBS Marker vol latch Off" />
    <mapping connection="ASP OBS Marker vol latch On" />
    <mapping connection="ASP OBS Mask Selected Off" />
    <mapping connection="ASP OBS Mask Selected On" />
    <mapping connection="ASP OBS NAV 1 vol Off" />
    <mapping connection="ASP OBS NAV 1 vol Pushed" />
    <mapping connection="ASP OBS NAV 1 vol latch Off" />
    <mapping connection="ASP OBS NAV 1 vol latch On" />
    <mapping connection="ASP OBS NAV 2 vol Off" />
    <mapping connection="ASP OBS NAV 2 vol Pushed" />
    <mapping connection="ASP OBS NAV 2 vol latch Off" />
    <mapping connection="ASP OBS NAV 2 vol latch On" />
    <mapping connection="ASP OBS Normal Selected Off" />
    <mapping connection="ASP OBS Normal Selected On" />
    <mapping connection="ASP OBS PA vol Off" />
    <mapping connection="ASP OBS PA vol Pushed" />
    <mapping connection="ASP OBS PA vol latch Off" />
    <mapping connection="ASP OBS PA vol latch On" />
    <mapping connection="ASP OBS PA vol send Normal" />
    <mapping connection="ASP OBS PA vol send Pushed" />
    <mapping connection="ASP OBS RT Selected Off" />
    <mapping connection="ASP OBS RT Selected On" />
    <mapping connection="ASP OBS Spkr vol Off" />
    <mapping connection="ASP OBS Spkr vol Pushed" />
    <mapping connection="ASP OBS Spkr vol latch Off" />
    <mapping connection="ASP OBS Spkr vol latch On" />
    <mapping connection="ASP OBS SVC vol Off" />
    <mapping connection="ASP OBS SVC vol Pushed" />
    <mapping connection="ASP OBS SVC vol latch Off" />
    <mapping connection="ASP OBS SVC vol latch On" />
    <mapping connection="ASP OBS SVC vol send Normal" />
    <mapping connection="ASP OBS SVC vol send Pushed" />
    <mapping connection="ASP OBS VHF 1 vol Off" />
    <mapping connection="ASP OBS VHF 1 vol Pushed" />
    <mapping connection="ASP OBS VHF 1 vol latch Off" />
    <mapping connection="ASP OBS VHF 1 vol latch On" />
    <mapping connection="ASP OBS VHF 1 vol send Normal" />
    <mapping connection="ASP OBS VHF 1 vol send Pushed" />
    <mapping connection="ASP OBS VHF 2 vol Off" />
    <mapping connection="ASP OBS VHF 2 vol Pushed" />
    <mapping connection="ASP OBS VHF 2 vol latch Off" />
    <mapping connection="ASP OBS VHF 2 vol latch On" />
    <mapping connection="ASP OBS VHF 2 vol send Normal" />
    <mapping connection="ASP OBS VHF 2 vol send Pushed" />
    <mapping connection="ASP OBS VHF 3 vol Off" />
    <mapping connection="ASP OBS VHF 3 vol Pushed" />
    <mapping connection="ASP OBS VHF 3 vol latch Off" />
    <mapping connection="ASP OBS VHF 3 vol latch On" />
    <mapping connection="ASP OBS VHF 3 vol send Normal" />
    <mapping connection="ASP OBS VHF 3 vol send Pushed" />
    <mapping connection="ASP PA vol Off" />
    <mapping connection="ASP PA vol Pushed" />
    <mapping connection="ASP PA vol latch Off" />
    <mapping connection="ASP PA vol latch On" />
    <mapping connection="ASP PA vol send Normal" />
    <mapping connection="ASP PA vol send Pushed" />
    <mapping connection="ASP RT Selected Off" />
    <mapping connection="ASP RT Selected On" />
    <mapping connection="ASP Spkr vol Off" />
    <mapping connection="ASP Spkr vol Pushed" />
    <mapping connection="ASP Spkr vol latch Off" />
    <mapping connection="ASP Spkr vol latch On" />
    <mapping connection="ASP SVC vol Off" />
    <mapping connection="ASP SVC vol Pushed" />
    <mapping connection="ASP SVC vol latch Off" />
    <mapping connection="ASP SVC vol latch On" />
    <mapping connection="ASP SVC vol send Normal" />
    <mapping connection="ASP SVC vol send Pushed" />
    <mapping connection="ASP VHF 1 vol Off" />
    <mapping connection="ASP VHF 1 vol Pushed" />
    <mapping connection="ASP VHF 1 vol latch Off" />
    <mapping connection="ASP VHF 1 vol latch On" />
    <mapping connection="ASP VHF 1 vol send Normal" />
    <mapping connection="ASP VHF 1 vol send Pushed" />
    <mapping connection="ASP VHF 2 vol Off" />
    <mapping connection="ASP VHF 2 vol Pushed" />
    <mapping connection="ASP VHF 2 vol latch Off" />
    <mapping connection="ASP VHF 2 vol latch On" />
    <mapping connection="ASP VHF 2 vol send Normal" />
    <mapping connection="ASP VHF 2 vol send Pushed" />
    <mapping connection="ASP VHF 3 vol Off" />
    <mapping connection="ASP VHF 3 vol Pushed" />
    <mapping connection="ASP VHF 3 vol latch Off" />
    <mapping connection="ASP VHF 3 vol latch On" />
    <mapping connection="ASP VHF 3 vol send Normal" />
    <mapping connection="ASP VHF 3 vol send Pushed" />
    <mapping connection="ASP2 filter mode B" />
    <mapping connection="ASP2 filter mode V" />
    <mapping connection="ASP2 filter mode R" />
    <mapping connection="ASP3 filter mode B" />
    <mapping connection="ASP3 filter mode V" />
    <mapping connection="ASP3 filter mode R" />
    <mapping connection="Attend Off" />
    <mapping connection="Battery switch Off" />
    <mapping connection="Bell cutout Off" />
    <mapping connection="Bleed 1 Off" />
    <mapping connection="Bleed 2 Off" />
    <mapping connection="Bleed APU Off" />
    <mapping connection="Brake Input Off" />
    <mapping connection="Brake Input On" />
    <mapping connection="Bus transfer switch Off" />
    <mapping connection="Cargo fire aft selector Norm" />
    <mapping connection="Cargo fire aft selector A" />
    <mapping connection="Cargo fire aft selector B" />
    <mapping connection="Cargo fire arm aft Off" />
    <mapping connection="Cargo fire arm aft Pushed" />
    <mapping connection="Cargo fire arm aft latch Off" />
    <mapping connection="Cargo fire arm aft latch On" />
    <mapping connection="Cargo fire arm fwd Off" />
    <mapping connection="Cargo fire arm fwd Pushed" />
    <mapping connection="Cargo fire arm fwd latch Off" />
    <mapping connection="Cargo fire arm fwd latch On" />
    <mapping connection="Cargo fire disch Off" />
    <mapping connection="Cargo fire disch Pushed" />
    <mapping connection="Cargo fire ext aft PTT Normal" />
    <mapping connection="Cargo fire ext aft PTT Pushed" />
    <mapping connection="Cargo fire ext fwd PTT Normal" />
    <mapping connection="Cargo fire ext fwd PTT Pushed" />
    <mapping connection="Cargo fire fwd selector Norm" />
    <mapping connection="Cargo fire fwd selector A" />
    <mapping connection="Cargo fire fwd selector B" />
    <mapping connection="Cargo fire test Off" />
    <mapping connection="Cargo fire test Pushed" />
    <mapping connection="Chrono capt - Normal" />
    <mapping connection="Chrono capt - Pushed" />
    <mapping connection="Chrono capt + Normal" />
    <mapping connection="Chrono capt + Pushed" />
    <mapping connection="Chrono capt alternate control Run" />
    <mapping connection="Chrono capt alternate control Hold" />
    <mapping connection="Chrono capt alternate control Reset" />
    <mapping connection="Chrono capt CHR Normal" />
    <mapping connection="Chrono capt CHR Pushed" />
    <mapping connection="Chrono capt Date/Time Normal" />
    <mapping connection="Chrono capt Date/Time Pushed" />
    <mapping connection="Chrono capt ET Normal" />
    <mapping connection="Chrono capt ET Pushed" />
    <mapping connection="Chrono capt RESET Normal" />
    <mapping connection="Chrono capt RESET Pushed" />
    <mapping connection="Chrono capt SET Normal" />
    <mapping connection="Chrono capt SET Pushed" />
    <mapping connection="Chrono f/o - Normal" />
    <mapping connection="Chrono f/o - Pushed" />
    <mapping connection="Chrono f/o + Normal" />
    <mapping connection="Chrono f/o + Pushed" />
    <mapping connection="Chrono f/o alternate control Run" />
    <mapping connection="Chrono f/o alternate control Hold" />
    <mapping connection="Chrono f/o alternate control Reset" />
    <mapping connection="Chrono f/o CHR Normal" />
    <mapping connection="Chrono f/o CHR Pushed" />
    <mapping connection="Chrono f/o Date/Time Normal" />
    <mapping connection="Chrono f/o Date/Time Pushed" />
    <mapping connection="Chrono f/o ET Normal" />
    <mapping connection="Chrono f/o ET Pushed" />
    <mapping connection="Chrono f/o RESET Normal" />
    <mapping connection="Chrono f/o RESET Pushed" />
    <mapping connection="Chrono f/o SET Normal" />
    <mapping connection="Chrono f/o SET Pushed" />
    <mapping connection="Clock Captain Normal" />
    <mapping connection="Clock F/O Normal" />
    <mapping connection="Crossfeed Off" />
    <mapping connection="Disconnect 1 Off" />
    <mapping connection="Disconnect 2 Off" />
    <mapping connection="Display Control Panel Normal" />
    <mapping connection="Display Control Panel Both on 1" />
    <mapping connection="Display Control Panel Both on 2" />
    <mapping connection="Display source Auto" />
    <mapping connection="Display source All on 1" />
    <mapping connection="Display source All on 2" />
    <mapping connection="Dome light Dim" />
    <mapping connection="Dome light Off" />
    <mapping connection="Dome light Bright" />
    <mapping connection="EEC left Off" />
    <mapping connection="EEC left Pushed" />
    <mapping connection="EEC left latch Off" />
    <mapping connection="EEC left latch On" />
    <mapping connection="EEC right Off" />
    <mapping connection="EEC right Pushed" />
    <mapping connection="EEC right latch Off" />
    <mapping connection="EEC right latch On" />
    <mapping connection="Elec maint Off" />
    <mapping connection="Elevator trim CPT 1 Center" />
    <mapping connection="Elevator trim CPT 1 Up" />
    <mapping connection="Elevator trim CPT 1 Down" />
    <mapping connection="Elevator trim CPT 2 Center" />
    <mapping connection="Elevator trim CPT 2 Up" />
    <mapping connection="Elevator trim CPT 2 Down" />
    <mapping connection="Elevator trim F/O 1 Center" />
    <mapping connection="Elevator trim F/O 1 Up" />
    <mapping connection="Elevator trim F/O 1 Down" />
    <mapping connection="Elevator trim F/O 2 Center" />
    <mapping connection="Elevator trim F/O 2 Up" />
    <mapping connection="Elevator trim F/O 2 Down" />
    <mapping connection="Emer Exit Lights Off" />
    <mapping connection="Eng Anti-Ice 1 Off" />
    <mapping connection="Eng Anti-Ice 2 Off" />
    <mapping connection="Equip cooling exhaust Normal" />
    <mapping connection="Equip cooling exhaust Alternate" />
    <mapping connection="Equip cooling supply Normal" />
    <mapping connection="Equip cooling supply Alternate" />
    <mapping connection="Fire Ext test Off" />
    <mapping connection="Fire Ext test 1" />
    <mapping connection="Fire Ext test 2" />
    <mapping connection="Fire handle APU Off" />
    <mapping connection="Fire handle APU Left" />
    <mapping connection="Fire handle APU Right" />
    <mapping connection="Fire handle Engine 1 Off" />
    <mapping connection="Fire handle Engine 1 Left" />
    <mapping connection="Fire handle Engine 1 Right" />
    <mapping connection="Fire handle Engine 2 Off" />
    <mapping connection="Fire handle Engine 2 Left" />
    <mapping connection="Fire handle Engine 2 Right" />
    <mapping connection="Fire handle pull APU Normal" />
    <mapping connection="Fire handle pull APU Pull" />
    <mapping connection="Fire handle pull Engine 1 Normal" />
    <mapping connection="Fire handle pull Engine 1 Pull" />
    <mapping connection="Fire handle pull Engine 2 Normal" />
    <mapping connection="Fire handle pull Engine 2 Pull" />
    <mapping connection="Fire warning 1 Off" />
    <mapping connection="Fire warning 2 Off" />
    <mapping connection="Flap inhibit Inhibit" />
    <mapping connection="Flight freeze Off" />
    <mapping connection="Flight freeze On" />
    <mapping connection="Flight freeze toggle Normal" />
    <mapping connection="Flight freeze toggle Pushed" />
    <mapping connection="Flt Ctrl A Off" />
    <mapping connection="Flt Ctrl B Off" />
    <mapping connection="Flt Deck door AUTO" />
    <mapping connection="Flt Deck door UNLKD" />
    <mapping connection="Flt Deck door DENY" />
    <mapping connection="FMC Normal" />
    <mapping connection="FMC Both on L" />
    <mapping connection="FMC Both on R" />
    <mapping connection="Fuel Center Left Off" />
    <mapping connection="Fuel Center Right Off" />
    <mapping connection="Fuel flow Rate" />
    <mapping connection="Fuel Left Aft Off" />
    <mapping connection="Fuel Left Fwd Off" />
    <mapping connection="Fuel Right Aft Off" />
    <mapping connection="Fuel Right Fwd Off" />
    <mapping connection="Galley Off" />
    <mapping connection="Gear Off" />
    <mapping connection="Gear handle lock override Normal" />
    <mapping connection="Gear handle lock override Override" />
    <mapping connection="Gear inhibit Inhibit" />
    <mapping connection="GEN 1 Center" />
    <mapping connection="GEN 1 Off" />
    <mapping connection="GEN 2 Center" />
    <mapping connection="GEN 2 Off" />
    <mapping connection="Glideslope push to inhibit Normal" />
    <mapping connection="Glideslope push to inhibit Pushed" />
    <mapping connection="Glideslope push to inhibit F/O Normal" />
    <mapping connection="Glideslope push to inhibit F/O Pushed" />
    <mapping connection="GPWS Sys test Off" />
    <mapping connection="Ground call Off" />
    <mapping connection="Ground Power Off" />
    <mapping connection="Ground Power Center" />
    <mapping connection="Hyd ELEC1 Off" />
    <mapping connection="Hyd ELEC2 Off" />
    <mapping connection="Hyd ENG1 Off" />
    <mapping connection="Hyd ENG2 Off" />
    <mapping connection="Ignition select Both" />
    <mapping connection="IRS Normal" />
    <mapping connection="IRS Both on L" />
    <mapping connection="IRS Both on R" />
    <mapping connection="IRS Keypad 0 Off" />
    <mapping connection="IRS Keypad 0 Pushed" />
    <mapping connection="IRS Keypad 1 Off" />
    <mapping connection="IRS Keypad 1 Pushed" />
    <mapping connection="IRS Keypad 2 Off" />
    <mapping connection="IRS Keypad 2 Pushed" />
    <mapping connection="IRS Keypad 3 Off" />
    <mapping connection="IRS Keypad 3 Pushed" />
    <mapping connection="IRS Keypad 4 Off" />
    <mapping connection="IRS Keypad 4 Pushed" />
    <mapping connection="IRS Keypad 5 Off" />
    <mapping connection="IRS Keypad 5 Pushed" />
    <mapping connection="IRS Keypad 6 Off" />
    <mapping connection="IRS Keypad 6 Pushed" />
    <mapping connection="IRS Keypad 7 Off" />
    <mapping connection="IRS Keypad 7 Pushed" />
    <mapping connection="IRS Keypad 8 Off" />
    <mapping connection="IRS Keypad 8 Pushed" />
    <mapping connection="IRS Keypad 9 Off" />
    <mapping connection="IRS Keypad 9 Pushed" />
    <mapping connection="IRS Keypad CLR Off" />
    <mapping connection="IRS Keypad CLR Pushed" />
    <mapping connection="IRS Keypad ENT Off" />
    <mapping connection="IRS Keypad ENT Pushed" />
    <mapping connection="ISFD - Off" />
    <mapping connection="ISFD - Pushed" />
    <mapping connection="ISFD + Off" />
    <mapping connection="ISFD + Pushed" />
    <mapping connection="ISFD APP Off" />
    <mapping connection="ISFD APP Pushed" />
    <mapping connection="ISFD baro STD Off" />
    <mapping connection="ISFD baro STD Pushed" />
    <mapping connection="ISFD HP/IN Off" />
    <mapping connection="ISFD HP/IN Pushed" />
    <mapping connection="ISFD RST Off" />
    <mapping connection="ISFD RST Pushed" />
    <mapping connection="LE Devices test Off" />
    <mapping connection="Light Main Fixed L Off" />
    <mapping connection="Light Main Fixed R Off" />
    <mapping connection="Light Main Retract L Off" />
    <mapping connection="Light Main Retract L 3 POS Retracted" />
    <mapping connection="Light Main Retract L 3 POS Extended" />
    <mapping connection="Light Main Retract L 3 POS On" />
    <mapping connection="Light Main Retract R Off" />
    <mapping connection="Light Main Retract R 3 POS Retracted" />
    <mapping connection="Light Main Retract R 3 POS Extended" />
    <mapping connection="Light Main Retract R 3 POS On" />
    <mapping connection="Light Test Bright" />
    <mapping connection="Light Test Dim" />
    <mapping connection="Lights Anti collision Off" />
    <mapping connection="Lights Logo Off" />
    <mapping connection="Lights Position On" />
    <mapping connection="Lights Runway turnoff L Off" />
    <mapping connection="Lights Runway turnoff R Off" />
    <mapping connection="Lights Strobe Off" />
    <mapping connection="Lights Strobe &amp;&amp; Steady Strobe &amp;&amp; Steady" />
    <mapping connection="Lights Strobe &amp;&amp; Steady Off" />
    <mapping connection="Lights Strobe &amp;&amp; Steady Steady" />
    <mapping connection="Lights Taxi Off" />
    <mapping connection="Lights Wheel well Off" />
    <mapping connection="Lights Wing Off" />
    <mapping connection="Mach Airspeed warning test no1 Off" />
    <mapping connection="Mach Airspeed warning test no2 Off" />
    <mapping connection="Master caution 1 Off" />
    <mapping connection="Master caution 2 Off" />
    <mapping connection="MFD ENG Normal" />
    <mapping connection="MFD SYS Normal" />
    <mapping connection="No Smoking Off" />
    <mapping connection="Nose wheel steering Normal" />
    <mapping connection="Outflow valve Off" />
    <mapping connection="Outflow valve Open" />
    <mapping connection="Ovht Det left Normal" />
    <mapping connection="Ovht Det left A" />
    <mapping connection="Ovht Det left B" />
    <mapping connection="Ovht Det right Normal" />
    <mapping connection="Ovht Det right A" />
    <mapping connection="Ovht Det right B" />
    <mapping connection="Ovht test Off" />
    <mapping connection="Ovht test Fault/Inop" />
    <mapping connection="Ovht test Ovht/Fire" />
    <mapping connection="OVHT test Off" />
    <mapping connection="OVHT test On" />
    <mapping connection="Pack 1 Auto" />
    <mapping connection="Pack 2 Auto" />
    <mapping connection="Pause Off" />
    <mapping connection="Pause On" />
    <mapping connection="Pause toggle Normal" />
    <mapping connection="Pause toggle Pushed" />
    <mapping connection="Pneumatic Isolation switch Auto" />
    <mapping connection="Probe heat A Off" />
    <mapping connection="Probe heat B Off" />
    <mapping connection="Radio TFR ADF1 Normal" />
    <mapping connection="Radio TFR ADF1 Pushed" />
    <mapping connection="Radio TFR ADF2 Normal" />
    <mapping connection="Radio TFR ADF2 Pushed" />
    <mapping connection="Radio TFR COM1 Normal" />
    <mapping connection="Radio TFR COM1 Pushed" />
    <mapping connection="Radio TFR COM2 Normal" />
    <mapping connection="Radio TFR COM2 Pushed" />
    <mapping connection="Radio TFR COM3 Normal" />
    <mapping connection="Radio TFR COM3 Pushed" />
    <mapping connection="Radio TFR NAV1 Normal" />
    <mapping connection="Radio TFR NAV1 Pushed" />
    <mapping connection="Radio TFR NAV2 Normal" />
    <mapping connection="Radio TFR NAV2 Pushed" />
    <mapping connection="Radio XPDR selector 1 Off" />
    <mapping connection="Radio XPDR selector 1 0" />
    <mapping connection="Radio XPDR selector 1 1" />
    <mapping connection="Radio XPDR selector 1 2" />
    <mapping connection="Radio XPDR selector 1 3" />
    <mapping connection="Radio XPDR selector 1 4" />
    <mapping connection="Radio XPDR selector 1 5" />
    <mapping connection="Radio XPDR selector 1 6" />
    <mapping connection="Radio XPDR selector 1 7" />
    <mapping connection="Radio XPDR selector 2 Off" />
    <mapping connection="Radio XPDR selector 2 0" />
    <mapping connection="Radio XPDR selector 2 1" />
    <mapping connection="Radio XPDR selector 2 2" />
    <mapping connection="Radio XPDR selector 2 3" />
    <mapping connection="Radio XPDR selector 2 4" />
    <mapping connection="Radio XPDR selector 2 5" />
    <mapping connection="Radio XPDR selector 2 6" />
    <mapping connection="Radio XPDR selector 2 7" />
    <mapping connection="Radio XPDR selector 3 Off" />
    <mapping connection="Radio XPDR selector 3 0" />
    <mapping connection="Radio XPDR selector 3 1" />
    <mapping connection="Radio XPDR selector 3 2" />
    <mapping connection="Radio XPDR selector 3 3" />
    <mapping connection="Radio XPDR selector 3 4" />
    <mapping connection="Radio XPDR selector 3 5" />
    <mapping connection="Radio XPDR selector 3 6" />
    <mapping connection="Radio XPDR selector 3 7" />
    <mapping connection="Radio XPDR selector 4 Off" />
    <mapping connection="Radio XPDR selector 4 0" />
    <mapping connection="Radio XPDR selector 4 1" />
    <mapping connection="Radio XPDR selector 4 2" />
    <mapping connection="Radio XPDR selector 4 3" />
    <mapping connection="Radio XPDR selector 4 4" />
    <mapping connection="Radio XPDR selector 4 5" />
    <mapping connection="Radio XPDR selector 4 6" />
    <mapping connection="Radio XPDR selector 4 7" />
    <mapping connection="Recall 1 Off" />
    <mapping connection="Recall 2 Off" />
    <mapping connection="Recirc Fan L Off" />
    <mapping connection="Recirc Fan R Off" />
    <mapping connection="RMP Capt ADF Normal" />
    <mapping connection="RMP Capt ADF Pushed" />
    <mapping connection="RMP Capt AM Normal" />
    <mapping connection="RMP Capt AM Pushed" />
    <mapping connection="RMP Capt HF1 Normal" />
    <mapping connection="RMP Capt HF1 Pushed" />
    <mapping connection="RMP Capt HF2 Normal" />
    <mapping connection="RMP Capt HF2 Pushed" />
    <mapping connection="RMP Capt NAV1 Normal" />
    <mapping connection="RMP Capt NAV1 Pushed" />
    <mapping connection="RMP Capt NAV2 Normal" />
    <mapping connection="RMP Capt NAV2 Pushed" />
    <mapping connection="RMP Capt panel off Normal" />
    <mapping connection="RMP Capt panel off Pushed" />
    <mapping connection="RMP Capt transfer Normal" />
    <mapping connection="RMP Capt transfer Pushed" />
    <mapping connection="RMP Capt VHF1 Normal" />
    <mapping connection="RMP Capt VHF1 Pushed" />
    <mapping connection="RMP Capt VHF2 Normal" />
    <mapping connection="RMP Capt VHF2 Pushed" />
    <mapping connection="RMP Capt VHF3 Normal" />
    <mapping connection="RMP Capt VHF3 Pushed" />
    <mapping connection="RMP F/O ADF Normal" />
    <mapping connection="RMP F/O ADF Pushed" />
    <mapping connection="RMP F/O AM Normal" />
    <mapping connection="RMP F/O AM Pushed" />
    <mapping connection="RMP F/O HF1 Normal" />
    <mapping connection="RMP F/O HF1 Pushed" />
    <mapping connection="RMP F/O HF2 Normal" />
    <mapping connection="RMP F/O HF2 Pushed" />
    <mapping connection="RMP F/O NAV1 Normal" />
    <mapping connection="RMP F/O NAV1 Pushed" />
    <mapping connection="RMP F/O NAV2 Normal" />
    <mapping connection="RMP F/O NAV2 Pushed" />
    <mapping connection="RMP F/O panel off Normal" />
    <mapping connection="RMP F/O panel off Pushed" />
    <mapping connection="RMP F/O transfer Normal" />
    <mapping connection="RMP F/O transfer Pushed" />
    <mapping connection="RMP F/O VHF1 Normal" />
    <mapping connection="RMP F/O VHF1 Pushed" />
    <mapping connection="RMP F/O VHF2 Normal" />
    <mapping connection="RMP F/O VHF2 Pushed" />
    <mapping connection="RMP F/O VHF3 Normal" />
    <mapping connection="RMP F/O VHF3 Pushed" />
    <mapping connection="Rudder trim Center" />
    <mapping connection="Rudder trim Left" />
    <mapping connection="Rudder trim Right" />
    <mapping connection="Runway inhibit Norm" />
    <mapping connection="Runway inhibit Inhibit" />
    <mapping connection="Seatbelt Auto" />
    <mapping connection="Spoiler A Off" />
    <mapping connection="Spoiler B Off" />
    <mapping connection="Stab trim override Normal" />
    <mapping connection="Stab trim override Override" />
    <mapping connection="Stall test 1 Off" />
    <mapping connection="Stall test 2 Off" />
    <mapping connection="Standby Attitude Mode APP" />
    <mapping connection="Standby Attitude Mode OFF" />
    <mapping connection="Standby Attitude Mode BCRS" />
    <mapping connection="Standby power switch Off" />
    <mapping connection="Standby RMI NAV1 mode VOR" />
    <mapping connection="Standby RMI NAV1 mode ADF" />
    <mapping connection="Standby RMI NAV1 mode F/O VOR" />
    <mapping connection="Standby RMI NAV1 mode F/O ADF" />
    <mapping connection="Standby RMI NAV2 mode VOR" />
    <mapping connection="Standby RMI NAV2 mode ADF" />
    <mapping connection="Standby RMI NAV2 mode F/O VOR" />
    <mapping connection="Standby RMI NAV2 mode F/O ADF" />
    <mapping connection="Start 1 Off" />
    <mapping connection="Start 1 FLT" />
    <mapping connection="Start 2 Off" />
    <mapping connection="Start 2 FLT" />
    <mapping connection="TAT test Off" />
    <mapping connection="TCAS Stdby" />
    <mapping connection="TCAS Alt rptg off" />
    <mapping connection="TCAS XPDR" />
    <mapping connection="TCAS TA" />
    <mapping connection="TCAS TA/RA" />
    <mapping connection="TCAS Test" />
    <mapping connection="TCAS horizontal range Max" />
    <mapping connection="TCAS horizontal range 5" />
    <mapping connection="TCAS horizontal range 10" />
    <mapping connection="TCAS horizontal range 20" />
    <mapping connection="TCAS TEST Normal" />
    <mapping connection="TCAS TEST Pushed" />
    <mapping connection="TCAS vertical range Normal" />
    <mapping connection="TCAS vertical range Above" />
    <mapping connection="TCAS vertical range Below" />
    <mapping connection="Terrain inhibit Inhibit" />
    <mapping connection="Trim air Off" />
    <mapping connection="Trip reset Off" />
    <mapping connection="User 1 in Off" />
    <mapping connection="User 1 in On" />
    <mapping connection="User 10 in Off" />
    <mapping connection="User 10 in On" />
    <mapping connection="User 11 in Off" />
    <mapping connection="User 11 in On" />
    <mapping connection="User 12 in Off" />
    <mapping connection="User 12 in On" />
    <mapping connection="User 13 in Off" />
    <mapping connection="User 13 in On" />
    <mapping connection="User 14 in Off" />
    <mapping connection="User 14 in On" />
    <mapping connection="User 15 in Off" />
    <mapping connection="User 15 in On" />
    <mapping connection="User 16 in Off" />
    <mapping connection="User 16 in On" />
    <mapping connection="User 17 in Off" />
    <mapping connection="User 17 in On" />
    <mapping connection="User 18 in Off" />
    <mapping connection="User 18 in On" />
    <mapping connection="User 19 in Off" />
    <mapping connection="User 19 in On" />
    <mapping connection="User 2 in Off" />
    <mapping connection="User 2 in On" />
    <mapping connection="User 20 in Off" />
    <mapping connection="User 20 in On" />
    <mapping connection="User 3 in Off" />
    <mapping connection="User 3 in On" />
    <mapping connection="User 4 in Off" />
    <mapping connection="User 4 in On" />
    <mapping connection="User 5 in Off" />
    <mapping connection="User 5 in On" />
    <mapping connection="User 6 in Off" />
    <mapping connection="User 6 in On" />
    <mapping connection="User 7 in Off" />
    <mapping connection="User 7 in On" />
    <mapping connection="User 8 in Off" />
    <mapping connection="User 8 in On" />
    <mapping connection="User 9 in Off" />
    <mapping connection="User 9 in On" />
    <mapping connection="VHF NAV Normal" />
    <mapping connection="VHF NAV Both on 1" />
    <mapping connection="VHF NAV Both on 2" />
    <mapping connection="Voice recorder test Off" />
    <mapping connection="Voice recorder test Pushed" />
    <mapping connection="Weather Radar Mode WXR(VAR)" />
    <mapping connection="Weather Radar WX Left Normal" />
    <mapping connection="Weather Radar WX Left Pushed" />
    <mapping connection="Weather Radar WX+T Left Normal" />
    <mapping connection="Weather Radar WX+T Left Pushed" />
    <mapping connection="Window heat FWD L Off" />
    <mapping connection="Window heat FWD R Off" />
    <mapping connection="Window heat Side L Off" />
    <mapping connection="Window heat Side R Off" />
    <mapping connection="Window heat test Center" />
    <mapping connection="Wing Anti-Ice Off" />
    <mapping connection="Wiper left Park" />
    <mapping connection="Wiper left Int" />
    <mapping connection="Wiper left Low" />
    <mapping connection="Wiper left High" />
    <mapping connection="Wiper right Park" />
    <mapping connection="Wiper right Int" />
    <mapping connection="Wiper right Low" />
    <mapping connection="Wiper right High" />
    <mapping connection="XPDR ALT source 1" />
    <mapping connection="XPDR ALT source 2" />
    <mapping connection="XPDR Ident Normal" />
    <mapping connection="XPDR Ident Pushed" />
    <mapping connection="XPDR operation Auto" />
    <mapping connection="XPDR operation Standby" />
    <mapping connection="XPDR operation On" />
    <mapping connection="XPDR selector 1" />
    <mapping connection="XPDR selector 2" />
    <mapping connection="Yaw damper Off" />
    <mapping connection="Yoke PTT IC capt'ain Normal" />
    <mapping connection="Yoke PTT IC capt'ain Pushed" />
    <mapping connection="Yoke PTT IC F/O Normal" />
    <mapping connection="Yoke PTT IC F/O Pushed" />
    <mapping connection="Yoke PTT RT capt'ain Normal" />
    <mapping connection="Yoke PTT RT capt'ain Pushed" />
    <mapping connection="Yoke PTT RT F/O Normal" />
    <mapping connection="Yoke PTT RT F/O Pushed" />
    <mapping connection="AP Disconnect Yoke Capt Normal" />
    <mapping connection="AP Disconnect Yoke F/O Normal" />
    <mapping connection="AP Disconnect Yoke F/O Pushed" />
    <mapping connection="AT Disengage Off" />
    <mapping connection="AT Disengage Pushed" />
    <mapping connection="AT Disengage 2nd switch Off" />
    <mapping connection="AT Disengage 2nd switch Pushed" />
    <mapping connection="EFIS 1 ARPT Off" />
    <mapping connection="EFIS 1 ARPT Pushed" />
    <mapping connection="EFIS 1 Baro mode Inch" />
    <mapping connection="EFIS 1 Baro mode HPa" />
    <mapping connection="EFIS 1 Baro STD Off" />
    <mapping connection="EFIS 1 Baro STD Pushed" />
    <mapping connection="EFIS 1 CTR Off" />
    <mapping connection="EFIS 1 CTR Pushed" />
    <mapping connection="EFIS 1 DATA Off" />
    <mapping connection="EFIS 1 DATA Pushed" />
    <mapping connection="EFIS 1 FPV Off" />
    <mapping connection="EFIS 1 FPV Pushed" />
    <mapping connection="EFIS 1 Minimums mode Radio" />
    <mapping connection="EFIS 1 Minimums mode Baro" />
    <mapping connection="EFIS 1 MINS Reset Off" />
    <mapping connection="EFIS 1 MINS Reset Pushed" />
    <mapping connection="EFIS 1 Mode APP" />
    <mapping connection="EFIS 1 Mode VOR" />
    <mapping connection="EFIS 1 Mode MAP" />
    <mapping connection="EFIS 1 Mode PLN" />
    <mapping connection="EFIS 1 MTRS Off" />
    <mapping connection="EFIS 1 MTRS Pushed" />
    <mapping connection="EFIS 1 POS Off" />
    <mapping connection="EFIS 1 POS Pushed" />
    <mapping connection="EFIS 1 Range 5" />
    <mapping connection="EFIS 1 Range 10" />
    <mapping connection="EFIS 1 Range 20" />
    <mapping connection="EFIS 1 Range 40" />
    <mapping connection="EFIS 1 Range 80" />
    <mapping connection="EFIS 1 Range 160" />
    <mapping connection="EFIS 1 Range 320" />
    <mapping connection="EFIS 1 Range 640" />
    <mapping connection="EFIS 1 Selector 1 OFF" />
    <mapping connection="EFIS 1 Selector 1 VOR 1" />
    <mapping connection="EFIS 1 Selector 1 ADF 1" />
    <mapping connection="EFIS 1 Selector 2 OFF" />
    <mapping connection="EFIS 1 Selector 2 VOR 2" />
    <mapping connection="EFIS 1 Selector 2 ADF 2" />
    <mapping connection="EFIS 1 STA Off" />
    <mapping connection="EFIS 1 STA Pushed" />
    <mapping connection="EFIS 1 TERR Off" />
    <mapping connection="EFIS 1 TERR Pushed" />
    <mapping connection="EFIS 1 TFC Off" />
    <mapping connection="EFIS 1 TFC Pushed" />
    <mapping connection="EFIS 1 WPT Off" />
    <mapping connection="EFIS 1 WPT Pushed" />
    <mapping connection="EFIS 1 WXR Off" />
    <mapping connection="EFIS 1 WXR Pushed" />
    <mapping connection="EFIS 2 ARPT Off" />
    <mapping connection="EFIS 2 ARPT Pushed" />
    <mapping connection="EFIS 2 Baro mode Inch" />
    <mapping connection="EFIS 2 Baro mode HPa" />
    <mapping connection="EFIS 2 Baro STD Off" />
    <mapping connection="EFIS 2 Baro STD Pushed" />
    <mapping connection="EFIS 2 CTR Off" />
    <mapping connection="EFIS 2 CTR Pushed" />
    <mapping connection="EFIS 2 DATA Off" />
    <mapping connection="EFIS 2 DATA Pushed" />
    <mapping connection="EFIS 2 FPV Off" />
    <mapping connection="EFIS 2 FPV Pushed" />
    <mapping connection="EFIS 2 Minimums mode Radio" />
    <mapping connection="EFIS 2 Minimums mode Baro" />
    <mapping connection="EFIS 2 MINS Reset Off" />
    <mapping connection="EFIS 2 MINS Reset Pushed" />
    <mapping connection="EFIS 2 Mode APP" />
    <mapping connection="EFIS 2 Mode VOR" />
    <mapping connection="EFIS 2 Mode MAP" />
    <mapping connection="EFIS 2 Mode PLN" />
    <mapping connection="EFIS 2 MTRS Off" />
    <mapping connection="EFIS 2 MTRS Pushed" />
    <mapping connection="EFIS 2 POS Off" />
    <mapping connection="EFIS 2 POS Pushed" />
    <mapping connection="EFIS 2 Range 5" />
    <mapping connection="EFIS 2 Range 10" />
    <mapping connection="EFIS 2 Range 20" />
    <mapping connection="EFIS 2 Range 40" />
    <mapping connection="EFIS 2 Range 80" />
    <mapping connection="EFIS 2 Range 160" />
    <mapping connection="EFIS 2 Range 320" />
    <mapping connection="EFIS 2 Range 640" />
    <mapping connection="EFIS 2 Selector 1 OFF" />
    <mapping connection="EFIS 2 Selector 1 VOR 1" />
    <mapping connection="EFIS 2 Selector 1 ADF 1" />
    <mapping connection="EFIS 2 Selector 2 OFF" />
    <mapping connection="EFIS 2 Selector 2 VOR 2" />
    <mapping connection="EFIS 2 Selector 2 ADF 2" />
    <mapping connection="EFIS 2 STA Off" />
    <mapping connection="EFIS 2 STA Pushed" />
    <mapping connection="EFIS 2 TERR Off" />
    <mapping connection="EFIS 2 TERR Pushed" />
    <mapping connection="EFIS 2 TFC Off" />
    <mapping connection="EFIS 2 TFC Pushed" />
    <mapping connection="EFIS 2 WPT Off" />
    <mapping connection="EFIS 2 WPT Pushed" />
    <mapping connection="EFIS 2 WXR Off" />
    <mapping connection="EFIS 2 WXR Pushed" />
    <mapping connection="Flap Up" />
    <mapping connection="Flap 1" />
    <mapping connection="Flap 2" />
    <mapping connection="Flap 5" />
    <mapping connection="Flap 10" />
    <mapping connection="Flap 15" />
    <mapping connection="Flap 25" />
    <mapping connection="Flap 30" />
    <mapping connection="Flap 40" />
    <mapping connection="Fuel cutoff left Idle" />
    <mapping connection="Fuel cutoff right Idle" />
    <mapping connection="Gear horn cutout Off" />
    <mapping connection="Gear horn cutout Pushed" />
    <mapping connection="MCP Alt hold Off" />
    <mapping connection="MCP Alt hold Pushed" />
    <mapping connection="MCP Alt Int Off" />
    <mapping connection="MCP Alt Int Pushed" />
    <mapping connection="MCP AP Disengage Normal" />
    <mapping connection="MCP AP Disengage Disengage" />
    <mapping connection="MCP APP Off" />
    <mapping connection="MCP APP Pushed" />
    <mapping connection="MCP AT Arm Off" />
    <mapping connection="MCP AT Arm Arm" />
    <mapping connection="MCP Bank limit 25" />
    <mapping connection="MCP Bank limit 30" />
    <mapping connection="MCP Bank limit 10" />
    <mapping connection="MCP Bank limit 15" />
    <mapping connection="MCP Bank limit 20" />
    <mapping connection="MCP C/O Off" />
    <mapping connection="MCP C/O Pushed" />
    <mapping connection="MCP Captain F/D Off" />
    <mapping connection="MCP Captain F/D On" />
    <mapping connection="MCP CMD A Off" />
    <mapping connection="MCP CMD A Pushed" />
    <mapping connection="MCP CMD B Off" />
    <mapping connection="MCP CMD B Pushed" />
    <mapping connection="MCP CWS A Off" />
    <mapping connection="MCP CWS A Pushed" />
    <mapping connection="MCP CWS B Off" />
    <mapping connection="MCP CWS B Pushed" />
    <mapping connection="MCP F/O F/D Off" />
    <mapping connection="MCP F/O F/D On" />
    <mapping connection="MCP Heading + Bank sel Off" />
    <mapping connection="MCP Heading + Bank sel Pushed" />
    <mapping connection="MCP Heading sel Off" />
    <mapping connection="MCP Heading sel Pushed" />
    <mapping connection="MCP Level change Off" />
    <mapping connection="MCP Level change Pushed" />
    <mapping connection="MCP LNAV Off" />
    <mapping connection="MCP LNAV Pushed" />
    <mapping connection="MCP N1 Off" />
    <mapping connection="MCP N1 Pushed" />
    <mapping connection="MCP Speed hold Off" />
    <mapping connection="MCP Speed hold Pushed" />
    <mapping connection="MCP Speed Int Off" />
    <mapping connection="MCP Speed Int Pushed" />
    <mapping connection="MCP V/S Off" />
    <mapping connection="MCP V/S Pushed" />
    <mapping connection="MCP VNAV Off" />
    <mapping connection="MCP VNAV Pushed" />
    <mapping connection="MCP VOR/LOC Off" />
    <mapping connection="MCP VOR/LOC Pushed" />
    <mapping connection="Parking brake Off" />
    <mapping connection="Parking brake On" />
    <mapping connection="Stab trim main auto pilot Normal" />
    <mapping connection="Stab trim main auto pilot Cutout" />
    <mapping connection="Stab trim main elec Normal" />
    <mapping connection="Stab trim main elec Cutout" />
    <mapping connection="TOGA Off" />
    <mapping connection="TOGA Pushed" />
    <mapping connection="TOGA 2nd switch Off" />
    <mapping connection="TOGA 2nd switch Pushed" />
    <mapping connection="ADF1 ADF" />
    <mapping connection="ADF1 ANT" />
    <mapping connection="ADF2 ADF" />
    <mapping connection="ADF2 ANT" />
    <mapping connection="APU bottle discharged" />
    <mapping connection="APU bottle indicator" />
    <mapping connection="APU fire handle light" />
    <mapping connection="ASP ADF 1 vol" />
    <mapping connection="ASP ADF 2 vol" />
    <mapping connection="ASP FLT vol" />
    <mapping connection="ASP FLT vol send bar" />
    <mapping connection="ASP FO ADF 1 vol" />
    <mapping connection="ASP FO ADF 2 vol" />
    <mapping connection="ASP FO FLT vol" />
    <mapping connection="ASP FO FLT vol send bar" />
    <mapping connection="ASP FO HF 1" />
    <mapping connection="ASP FO HF 1 call" />
    <mapping connection="ASP FO HF 1 send bar" />
    <mapping connection="ASP FO HF 2" />
    <mapping connection="ASP FO HF 2 call" />
    <mapping connection="ASP FO HF 2 send bar" />
    <mapping connection="ASP FO Marker vol" />
    <mapping connection="ASP FO NAV 1 vol" />
    <mapping connection="ASP FO NAV 2 vol" />
    <mapping connection="ASP FO PA vol" />
    <mapping connection="ASP FO PA vol send bar" />
    <mapping connection="ASP FO Spkr vol" />
    <mapping connection="ASP FO SVC vol" />
    <mapping connection="ASP FO SVC vol send bar" />
    <mapping connection="ASP FO VHF 1 vol" />
    <mapping connection="ASP FO VHF 1 vol call" />
    <mapping connection="ASP FO VHF 1 vol send bar" />
    <mapping connection="ASP FO VHF 2 vol" />
    <mapping connection="ASP FO VHF 2 vol call" />
    <mapping connection="ASP FO VHF 2 vol send bar" />
    <mapping connection="ASP FO VHF 3 vol" />
    <mapping connection="ASP FO VHF 3 vol call" />
    <mapping connection="ASP FO VHF 3 vol send bar" />
    <mapping connection="ASP HF 1" />
    <mapping connection="ASP HF 1 call" />
    <mapping connection="ASP HF 1 send bar" />
    <mapping connection="ASP HF 2" />
    <mapping connection="ASP HF 2 call" />
    <mapping connection="ASP HF 2 send bar" />
    <mapping connection="ASP Marker vol" />
    <mapping connection="ASP NAV 1 vol" />
    <mapping connection="ASP NAV 2 vol" />
    <mapping connection="ASP OBS ADF 1 vol" />
    <mapping connection="ASP OBS ADF 2 vol" />
    <mapping connection="ASP OBS FLT vol" />
    <mapping connection="ASP OBS FLT vol send bar" />
    <mapping connection="ASP OBS HF 1" />
    <mapping connection="ASP OBS HF 1 call" />
    <mapping connection="ASP OBS HF 1 send bar" />
    <mapping connection="ASP OBS HF 2" />
    <mapping connection="ASP OBS HF 2 call" />
    <mapping connection="ASP OBS HF 2 send bar" />
    <mapping connection="ASP OBS Marker vol" />
    <mapping connection="ASP OBS NAV 1 vol" />
    <mapping connection="ASP OBS NAV 2 vol" />
    <mapping connection="ASP OBS PA vol" />
    <mapping connection="ASP OBS PA vol send bar" />
    <mapping connection="ASP OBS Spkr vol" />
    <mapping connection="ASP OBS SVC vol" />
    <mapping connection="ASP OBS SVC vol send bar" />
    <mapping connection="ASP OBS VHF 1 vol" />
    <mapping connection="ASP OBS VHF 1 vol call" />
    <mapping connection="ASP OBS VHF 1 vol send bar" />
    <mapping connection="ASP OBS VHF 2 vol" />
    <mapping connection="ASP OBS VHF 2 vol call" />
    <mapping connection="ASP OBS VHF 2 vol send bar" />
    <mapping connection="ASP OBS VHF 3 vol" />
    <mapping connection="ASP OBS VHF 3 vol call" />
    <mapping connection="ASP OBS VHF 3 vol send bar" />
    <mapping connection="ASP PA vol" />
    <mapping connection="ASP PA vol send bar" />
    <mapping connection="ASP Spkr vol" />
    <mapping connection="ASP SVC vol" />
    <mapping connection="ASP SVC vol send bar" />
    <mapping connection="ASP VHF 1 vol" />
    <mapping connection="ASP VHF 1 vol call" />
    <mapping connection="ASP VHF 1 vol send bar" />
    <mapping connection="ASP VHF 2 vol" />
    <mapping connection="ASP VHF 2 vol call" />
    <mapping connection="ASP VHF 2 vol send bar" />
    <mapping connection="ASP VHF 3 vol" />
    <mapping connection="ASP VHF 3 vol call" />
    <mapping connection="ASP VHF 3 vol send bar" />
    <mapping connection="Autoland" />
    <mapping connection="Brake Temp" />
    <mapping connection="Cargo fire armed aft" />
    <mapping connection="Cargo fire armed fwd" />
    <mapping connection="Cargo fire detector fault" />
    <mapping connection="Cargo fire disch light" />
    <mapping connection="Cargo fire ext light aft" />
    <mapping connection="Cargo fire ext light fwd" />
    <mapping connection="Cargo fire indicator aft" />
    <mapping connection="Cargo fire indicator fwd" />
    <mapping connection="CDU CALL light" />
    <mapping connection="CDU EXEC light" />
    <mapping connection="CDU FAIL light" />
    <mapping connection="CDU MSG light" />
    <mapping connection="CDU OFFSET light" />
    <mapping connection="CDU2 CALL light" />
    <mapping connection="CDU2 EXEC light" />
    <mapping connection="CDU2 FAIL light" />
    <mapping connection="CDU2 MSG light" />
    <mapping connection="CDU2 OFFSET light" />
    <mapping connection="Door Air St'airs" />
    <mapping connection="Door auto unlock" />
    <mapping connection="Door lock fail" />
    <mapping connection="Engine 1 fire handle light" />
    <mapping connection="Engine 2 fire handle light" />
    <mapping connection="Fire APU Det Inop" />
    <mapping connection="Fire Fault" />
    <mapping connection="Fire Wheel well" />
    <mapping connection="Flap load relief" />
    <mapping connection="GLS" />
    <mapping connection="HF1 AM modulation" />
    <mapping connection="HF2 AM modulation" />
    <mapping connection="ILS" />
    <mapping connection="IRS Keypad CLR cue" />
    <mapping connection="IRS Keypad ENT cue" />
    <mapping connection="IRS Panel dot 1" />
    <mapping connection="IRS Panel dot 2" />
    <mapping connection="IRS Panel dot 3" />
    <mapping connection="IRS Panel dot 4" />
    <mapping connection="IRS Panel dot 5" />
    <mapping connection="IRS Panel dot 6" />
    <mapping connection="L bottle discharged" />
    <mapping connection="L bottle indicator" />
    <mapping connection="Lavatory smoke" />
    <mapping connection="Low oil pressure left" />
    <mapping connection="Low oil pressure right" />
    <mapping connection="R bottle discharged" />
    <mapping connection="R bottle indicator" />
    <mapping connection="RMP Capt ADF indicator" />
    <mapping connection="RMP Capt AM" />
    <mapping connection="RMP Capt HF1 indicator" />
    <mapping connection="RMP Capt HF2 indicator" />
    <mapping connection="RMP Capt NAV1 indicator" />
    <mapping connection="RMP Capt NAV2 indicator" />
    <mapping connection="RMP Capt offside tuning" />
    <mapping connection="RMP Capt VHF1 indicator" />
    <mapping connection="RMP Capt VHF2 indicator" />
    <mapping connection="RMP Capt VHF3 indicator" />
    <mapping connection="RMP F/O ADF indicator" />
    <mapping connection="RMP F/O AM" />
    <mapping connection="RMP F/O HF1 indicator" />
    <mapping connection="RMP F/O HF2 indicator" />
    <mapping connection="RMP F/O NAV1 indicator" />
    <mapping connection="RMP F/O NAV2 indicator" />
    <mapping connection="RMP F/O offside tuning" />
    <mapping connection="RMP F/O VHF1 indicator" />
    <mapping connection="RMP F/O VHF2 indicator" />
    <mapping connection="RMP F/O VHF3 indicator" />
    <mapping connection="Runway Inop" />
    <mapping connection="Stab out of trim" />
    <mapping connection="Start valve open left" />
    <mapping connection="Start valve open right" />
    <mapping connection="Stdby Rud On" />
    <mapping connection="Transponder 1 Active" />
    <mapping connection="Transponder 2 Active" />
    <mapping connection="Voice recorder status" />
    <mapping connection="Weather Radar WX Left Indicator" />
    <mapping connection="Weather Radar WX+T Left Indicator" />
    <mapping connection="XPDR Fail" />
    <mapping connection="MCP A/T" />
    <mapping connection="MCP Alt hold" />
    <mapping connection="MCP APP" />
    <mapping connection="MCP CMD A" />
    <mapping connection="MCP CMD B" />
    <mapping connection="MCP CWS A" />
    <mapping connection="MCP CWS B" />
    <mapping connection="MCP FCC A Master" />
    <mapping connection="MCP FCC B Master" />
    <mapping connection="MCP HDG SEL" />
    <mapping connection="MCP Level Change" />
    <mapping connection="MCP LNAV" />
    <mapping connection="MCP N1" />
    <mapping connection="MCP Speed" />
    <mapping connection="MCP V/S" />
    <mapping connection="MCP VNAV" />
    <mapping connection="MCP VOR/LOC" />
    <mapping connection="Parking brake" />
    <mapping connection="Aileron trim gauge" />
    <mapping connection="Cabin altitude" />
    <mapping connection="Elevator trim gauge" />
    <mapping connection="Elevator trim gauge 2" />
    <mapping connection="Flap" />
    <mapping connection="Pressure Right" />
    <mapping connection="Rudder trim gauge" />
    <mapping connection="Standby altimeter" />
    <mapping connection="Standby Attitude bank" />
    <mapping connection="Standby Attitude pitch" />
    <mapping connection="Standby barberpole" />
    <mapping connection="Standby Glideslope" />
    <mapping connection="Standby Localiser" />
    <mapping connection="Standby speed" />
    <mapping connection="Wet compass" />
    <mapping connection="Electric Panel" />
    <mapping connection="IRS Display" />
    <mapping connection="80kts" />
    <mapping connection="A/T disconnect solenoid" />
    <mapping connection="A/T hold solenoid" />
    <mapping connection="Above transition altitude" />
    <mapping connection="AC Power" />
    <mapping connection="APU running" />
    <mapping connection="APU starting" />
    <mapping connection="APU stopping" />
    <mapping connection="ASP ASP Alt Out" />
    <mapping connection="ASP ASP Boom Out" />
    <mapping connection="ASP ASP IC Out" />
    <mapping connection="ASP ASP Mask Out" />
    <mapping connection="ASP ASP Norm Out" />
    <mapping connection="ASP ASP RT Out" />
    <mapping connection="ASP FO ASP Alt Out" />
    <mapping connection="ASP FO ASP Boom Out" />
    <mapping connection="ASP FO ASP IC Out" />
    <mapping connection="ASP FO ASP Mask Out" />
    <mapping connection="ASP FO ASP Norm Out" />
    <mapping connection="ASP FO ASP RT Out" />
    <mapping connection="ASP OBS ASP Alt Out" />
    <mapping connection="ASP OBS ASP Boom Out" />
    <mapping connection="ASP OBS ASP IC Out" />
    <mapping connection="ASP OBS ASP Mask Out" />
    <mapping connection="ASP OBS ASP Norm Out" />
    <mapping connection="ASP OBS ASP RT Out" />
    <mapping connection="Attend active" />
    <mapping connection="Autobrake reset" />
    <mapping connection="Autopilot pitch CMD" />
    <mapping connection="Autopilot pitch CWS" />
    <mapping connection="Autopilot roll CMD" />
    <mapping connection="Autopilot roll CWS" />
    <mapping connection="Braking" />
    <mapping connection="Chrono capt  label CHR" />
    <mapping connection="Chrono capt  label DAY MONTH" />
    <mapping connection="Chrono capt  label ET" />
    <mapping connection="Chrono capt  label HLD" />
    <mapping connection="Chrono capt  label RUN" />
    <mapping connection="Chrono capt  label TIME" />
    <mapping connection="Chrono capt  label UTC" />
    <mapping connection="Chrono capt  label YEAR" />
    <mapping connection="Chrono f/o  label CHR" />
    <mapping connection="Chrono f/o  label DAY MONTH" />
    <mapping connection="Chrono f/o  label ET" />
    <mapping connection="Chrono f/o  label HLD" />
    <mapping connection="Chrono f/o  label RUN" />
    <mapping connection="Chrono f/o  label TIME" />
    <mapping connection="Chrono f/o  label UTC" />
    <mapping connection="Chrono f/o  label YEAR" />
    <mapping connection="Cowl valve open L bright" />
    <mapping connection="Cowl valve open R bright" />
    <mapping connection="Crossfeed indicator bright" />
    <mapping connection="DC Power" />
    <mapping connection="Domelight bright" />
    <mapping connection="Domelight dim" />
    <mapping connection="Domelight master" />
    <mapping connection="Emergency exit lights" />
    <mapping connection="ENG Valve Closed L bright" />
    <mapping connection="ENG Valve Closed R bright" />
    <mapping connection="Fire handle unlock APU" />
    <mapping connection="Fire handle unlock Engine 1" />
    <mapping connection="Fire handle unlock Engine 2" />
    <mapping connection="Flap gate 1" />
    <mapping connection="Flap gate 10" />
    <mapping connection="Flap gate 15" />
    <mapping connection="Flap gate 2" />
    <mapping connection="Flap gate 25" />
    <mapping connection="Flap gate 30" />
    <mapping connection="Flap gate 40" />
    <mapping connection="Flap gate 5" />
    <mapping connection="Flap gate up" />
    <mapping connection="FMA pitch mode ALT ACQ " />
    <mapping connection="FMA pitch mode ALT HOLD" />
    <mapping connection="FMA pitch mode FLARE" />
    <mapping connection="FMA pitch mode G/P" />
    <mapping connection="FMA pitch mode G/S" />
    <mapping connection="FMA pitch mode MCP_SPD" />
    <mapping connection="FMA pitch mode TOGA" />
    <mapping connection="FMA pitch mode V/S" />
    <mapping connection="FMA pitch mode VNAV ALT " />
    <mapping connection="FMA pitch mode VNAV PATH" />
    <mapping connection="FMA pitch mode VNAV SPD " />
    <mapping connection="FMA roll mode HDG BACKCOURSE" />
    <mapping connection="FMA roll mode HDG FAC" />
    <mapping connection="FMA roll mode HDG LNAV" />
    <mapping connection="FMA roll mode HDG SEL" />
    <mapping connection="FMA roll mode HDG VOR/LOG" />
    <mapping connection="FMA thrust mode ARM" />
    <mapping connection="FMA thrust mode FMC_SPD" />
    <mapping connection="FMA thrust mode GA" />
    <mapping connection="FMA thrust mode MCP_SPD" />
    <mapping connection="FMA thrust mode N1" />
    <mapping connection="FMA thrust mode RETARD" />
    <mapping connection="FMA thrust mode THR_HLD" />
    <mapping connection="Gear handle release solenoid" />
    <mapping connection="Gear wind" />
    <mapping connection="Ground gate" />
    <mapping connection="Hydraulics A available" />
    <mapping connection="Hydraulics available" />
    <mapping connection="Hydraulics B available" />
    <mapping connection="Inner marker" />
    <mapping connection="IRS 1 attitude" />
    <mapping connection="IRS 1 heading" />
    <mapping connection="IRS 1 position" />
    <mapping connection="IRS 2 attitude" />
    <mapping connection="IRS 2 heading" />
    <mapping connection="IRS 2 position" />
    <mapping connection="Light test" />
    <mapping connection="Master Dim" />
    <mapping connection="MCP Speed flashing A" />
    <mapping connection="MCP Speed flashing B" />
    <mapping connection="Middle marker" />
    <mapping connection="No smoking sign" />
    <mapping connection="Nosewheel rotating" />
    <mapping connection="Outer marker" />
    <mapping connection="Overhead backlight master" />
    <mapping connection="Pack L operating" />
    <mapping connection="Pack R operating" />
    <mapping connection="Panel lights capt'ain" />
    <mapping connection="Panel lights control stand" />
    <mapping connection="Panel lights F/O" />
    <mapping connection="Panel lights flood" />
    <mapping connection="Parking brake hold" />
    <mapping connection="Parking brake release" />
    <mapping connection="Pass oxy deployed" />
    <mapping connection="Pressure loss high" />
    <mapping connection="Pressure loss low" />
    <mapping connection="Pressurisation display dashed out" />
    <mapping connection="Pressurisation display power" />
    <mapping connection="Ram door full open L bright" />
    <mapping connection="Ram door full open R bright" />
    <mapping connection="Recirc Fan L running" />
    <mapping connection="Recirc Fan R running" />
    <mapping connection="Rudder trim indicator OFF Flag" />
    <mapping connection="Seatbelt sign" />
    <mapping connection="SPAR Valve Closed L bright" />
    <mapping connection="SPAR Valve Closed R bright" />
    <mapping connection="Speedbrake autodeploy" />
    <mapping connection="Speedbrake autorestow" />
    <mapping connection="Speedbrake extended" />
    <mapping connection="Speedbrake extended in air" />
    <mapping connection="Starter 1 solenoid" />
    <mapping connection="Starter 2 solenoid" />
    <mapping connection="Stick shaker" />
    <mapping connection="Stick shaker F/O" />
    <mapping connection="Throttle Servo Power left" />
    <mapping connection="Throttle Servo Power right" />
    <mapping connection="Trim motor down" />
    <mapping connection="Trim motor up" />
    <mapping connection="User 1 out" />
    <mapping connection="User 10 out" />
    <mapping connection="User 11 out" />
    <mapping connection="User 12 out" />
    <mapping connection="User 13 out" />
    <mapping connection="User 14 out" />
    <mapping connection="User 15 out" />
    <mapping connection="User 16 out" />
    <mapping connection="User 17 out" />
    <mapping connection="User 18 out" />
    <mapping connection="User 19 out" />
    <mapping connection="User 2 out" />
    <mapping connection="User 20 out" />
    <mapping connection="User 3 out" />
    <mapping connection="User 4 out" />
    <mapping connection="User 5 out" />
    <mapping connection="User 6 out" />
    <mapping connection="User 7 out" />
    <mapping connection="User 8 out" />
    <mapping connection="User 9 out" />
    <mapping connection="V1" />
    <mapping connection="V2" />
    <mapping connection="VRotate" />
    <mapping connection="WAI L Valve Open bright" />
    <mapping connection="WAI R Valve Open bright" />
    <mapping connection="Wing Anti-Ice hold actuator" />
    <mapping connection="Wing Anti-Ice off actuator" />
    <mapping connection="Yaw damper hold actuator" />
    <mapping connection="Yaw damper off actuator" />
    <mapping connection="ADF1 mode" />
    <mapping connection="ADF2 mode" />
    <mapping connection="Aileron trim gauge numerical" />
    <mapping connection="Ampere ACStandbyBus" />
    <mapping connection="Ampere BattBus" />
    <mapping connection="Ampere DCBus1" />
    <mapping connection="Ampere DCBus2" />
    <mapping connection="Ampere DCStandbyBus" />
    <mapping connection="Ampere GalleyBusLeft" />
    <mapping connection="Ampere GalleyBusRight" />
    <mapping connection="Ampere GroundServicesBus" />
    <mapping connection="Ampere HotBattBus" />
    <mapping connection="Ampere Inverter" />
    <mapping connection="Ampere MainBus1" />
    <mapping connection="Ampere MainBus2" />
    <mapping connection="Ampere switchedground" />
    <mapping connection="Ampere SwitchedHotBattBus" />
    <mapping connection="Ampere TR 1" />
    <mapping connection="Ampere TR 2" />
    <mapping connection="Ampere TR 3" />
    <mapping connection="Ampere TransBus1" />
    <mapping connection="Ampere TransBus2" />
    <mapping connection="APU numerical" />
    <mapping connection="Brake pressure numerical" />
    <mapping connection="Cabin altitude numerical" />
    <mapping connection="Cabin temperature numerical" />
    <mapping connection="Cabin VSI numerical" />
    <mapping connection="Chrono capt 7seg lower left" />
    <mapping connection="Chrono capt 7seg lower right" />
    <mapping connection="Chrono capt 7seg upper left" />
    <mapping connection="Chrono capt 7seg upper right" />
    <mapping connection="Chrono f/o 7seg lower left" />
    <mapping connection="Chrono f/o 7seg lower right" />
    <mapping connection="Chrono f/o 7seg upper left" />
    <mapping connection="Chrono f/o 7seg upper right" />
    <mapping connection="Electric Panel Upper center" />
    <mapping connection="Elevator trim gauge 2 numerical" />
    <mapping connection="Elevator trim gauge numerical" />
    <mapping connection="Flap numerical" />
    <mapping connection="Flap right numerical" />
    <mapping connection="Fuel Flow left" />
    <mapping connection="Fuel Flow right" />
    <mapping connection="Fuel Temperature numerical" />
    <mapping connection="Left Engine Fuel numerical" />
    <mapping connection="MCP ALT VAL output" />
    <mapping connection="MCP COURSE 1 VAL output" />
    <mapping connection="MCP COURSE 2 VAL output" />
    <mapping connection="MCP HEADING VAL output" />
    <mapping connection="MCP SPEED VAL output" />
    <mapping connection="MCP V/S VAL output" />
    <mapping connection="Outflow valve position numerical" />
    <mapping connection="Oxygen pressure numerical" />
    <mapping connection="Pressure differential numerical" />
    <mapping connection="Pressure Left numerical" />
    <mapping connection="Pressure Right numerical" />
    <mapping connection="Radio altitude" />
    <mapping connection="Radio freq ADF1" />
    <mapping connection="Radio freq ADF2" />
    <mapping connection="Radio freq COM1" />
    <mapping connection="Radio freq COM2" />
    <mapping connection="Radio freq COM3" />
    <mapping connection="Radio freq HF1" />
    <mapping connection="Radio freq HF2" />
    <mapping connection="Radio freq NAV1" />
    <mapping connection="Radio freq NAV2" />
    <mapping connection="Radio freq XPDR" />
    <mapping connection="Radio freq XPDR2" />
    <mapping connection="Radio standby freq ADF1" />
    <mapping connection="Radio standby freq ADF2" />
    <mapping connection="Radio standby freq COM1" />
    <mapping connection="Radio standby freq COM2" />
    <mapping connection="Radio standby freq COM3" />
    <mapping connection="Radio standby freq HF1" />
    <mapping connection="Radio standby freq HF2" />
    <mapping connection="Radio standby freq NAV1" />
    <mapping connection="Radio standby freq NAV2" />
    <mapping connection="Radio standby freq XPDR2" />
    <mapping connection="Right Engine Fuel numerical" />
    <mapping connection="RMP Capt active mode" />
    <mapping connection="RMP Capt active value" />
    <mapping connection="RMP Capt standby mode" />
    <mapping connection="RMP Capt standby value" />
    <mapping connection="RMP F/O active mode" />
    <mapping connection="RMP F/O active value" />
    <mapping connection="RMP F/O standby mode" />
    <mapping connection="RMP F/O standby value" />
    <mapping connection="Rudder trim gauge numerical" />
    <mapping connection="Speedbrake servo numerical" />
    <mapping connection="Standby altimeter numerical" />
    <mapping connection="Standby Attitude bank numerical" />
    <mapping connection="Standby Attitude pitch numerical" />
    <mapping connection="Standby barberpole numerical" />
    <mapping connection="Standby Glideslope numerical" />
    <mapping connection="Standby Localiser numerical" />
    <mapping connection="Standby speed numerical" />
    <mapping connection="Throttle Servo left numerical" />
    <mapping connection="Throttle Servo right numerical" />
    <mapping connection="Trim motor value" />
    <mapping connection="Volt ACStandbyBus" />
    <mapping connection="Volt BattBus" />
    <mapping connection="Volt DCBus1" />
    <mapping connection="Volt DCBus2" />
    <mapping connection="Volt DCStandbyBus" />
    <mapping connection="Volt GalleyBusLeft" />
    <mapping connection="Volt GalleyBusRight" />
    <mapping connection="Volt GroundServicesBus" />
    <mapping connection="Volt HotBattBus" />
    <mapping connection="Volt MainBus1" />
    <mapping connection="Volt MainBus2" />
    <mapping connection="Volt switchedground" />
    <mapping connection="Volt SwitchedHotBattBus" />
    <mapping connection="Volt TransBus1" />
    <mapping connection="Volt TransBus2" />
    <mapping connection="Wet compass numerical" />
    <mapping connection="Yaw damper gauge numerical" />
    <mapping connection="Altitude alert" />
    <mapping connection="Approaching Minimums" />
    <mapping connection="Audio addon APU start" />
    <mapping connection="Audio addon APU start input Off" />
    <mapping connection="Audio addon APU STOP" />
    <mapping connection="Audio addon APU STOP input Off" />
    <mapping connection="Audio addon B737 APU GEN RUN" />
    <mapping connection="Audio addon B737 APU GEN RUN input Off" />
    <mapping connection="Audio addon BATTERY power on" />
    <mapping connection="Audio addon BATTERY power on input Off" />
    <mapping connection="Audio addon FO  80 KTS" />
    <mapping connection="Audio addon FO  80 KTS input Off" />
    <mapping connection="Audio addon Hydraulic A" />
    <mapping connection="Audio addon Hydraulic A input Off" />
    <mapping connection="Audio addon Hydraulic B" />
    <mapping connection="Audio addon Hydraulic B input Off" />
    <mapping connection="Audio addon L Recirc Fan L" />
    <mapping connection="Audio addon L Recirc Fan L input Off" />
    <mapping connection="Audio addon nchime" />
    <mapping connection="Audio addon nchime input Off" />
    <mapping connection="Audio addon PACK L" />
    <mapping connection="Audio addon PACK L input Off" />
    <mapping connection="Audio addon PACK R" />
    <mapping connection="Audio addon PACK R input Off" />
    <mapping connection="Audio addon Prosim_V1" />
    <mapping connection="Audio addon Prosim_V1 input Off" />
    <mapping connection="Audio addon Prosim_V2" />
    <mapping connection="Audio addon Prosim_V2 input Off" />
    <mapping connection="Audio addon Prosim_VR" />
    <mapping connection="Audio addon Prosim_VR input Off" />
    <mapping connection="Audio addon R Recirc Fan R" />
    <mapping connection="Audio addon R Recirc Fan R input Off" />
    <mapping connection="Audio addon SPEEDBRAKE" />
    <mapping connection="Audio addon SPEEDBRAKE input Off" />
    <mapping connection="Audio addon TRIM DOWN" />
    <mapping connection="Audio addon TRIM DOWN input Off" />
    <mapping connection="Audio addon TRIM UP" />
    <mapping connection="Audio addon TRIM UP input Off" />
    <mapping connection="Autopilot Disconnect" />
    <mapping connection="Bank angle" />
    <mapping connection="Dont sink" />
    <mapping connection="Fire audio" />
    <mapping connection="Gear warning" />
    <mapping connection="Glideslope" />
    <mapping connection="GPWS 10" />
    <mapping connection="GPWS 100" />
    <mapping connection="GPWS 1000" />
    <mapping connection="GPWS 20" />
    <mapping connection="GPWS 200" />
    <mapping connection="GPWS 2500" />
    <mapping connection="GPWS 30" />
    <mapping connection="GPWS 300" />
    <mapping connection="GPWS 40" />
    <mapping connection="GPWS 400" />
    <mapping connection="GPWS 50" />
    <mapping connection="GPWS 500" />
    <mapping connection="Ground call" />
    <mapping connection="High Chime" />
    <mapping connection="High-Low Chime" />
    <mapping connection="Low Chime" />
    <mapping connection="Minimums" />
    <mapping connection="No smoking Audio" />
    <mapping connection="Overspeed" />
    <mapping connection="Plus 100" />
    <mapping connection="Pullup" />
    <mapping connection="PWS Caution" />
    <mapping connection="PWS Warning Landing" />
    <mapping connection="PWS Warning Take Off" />
    <mapping connection="Seatbelt Audio" />
    <mapping connection="Sinkrate" />
    <mapping connection="Takeoff Config" />
    <mapping connection="TCAS Clear of conflict" />
    <mapping connection="TCAS Climb" />
    <mapping connection="TCAS Crossing Climb" />
    <mapping connection="TCAS Crossing Descend" />
    <mapping connection="TCAS Descend" />
    <mapping connection="TCAS Traffic" />
    <mapping connection="Too low flap" />
    <mapping connection="Too low gear" />
    <mapping connection="Too low terrain" />
    <mapping connection="Windshear" />
    <mapping connection="AFT CAB selector" />
    <mapping connection="ASP ADF 1 vol volume" />
    <mapping connection="ASP ADF 2 vol volume" />
    <mapping connection="ASP FLT vol volume" />
    <mapping connection="ASP FO ADF 1 vol volume" />
    <mapping connection="ASP FO ADF 2 vol volume" />
    <mapping connection="ASP FO FLT vol volume" />
    <mapping connection="ASP FO HF 1 volume" />
    <mapping connection="ASP FO HF 2 volume" />
    <mapping connection="ASP FO Marker vol volume" />
    <mapping connection="ASP FO NAV 1 vol volume" />
    <mapping connection="ASP FO NAV 2 vol volume" />
    <mapping connection="ASP FO PA vol volume" />
    <mapping connection="ASP FO Spkr vol volume" />
    <mapping connection="ASP FO SVC vol volume" />
    <mapping connection="ASP FO VHF 1 vol volume" />
    <mapping connection="ASP FO VHF 2 vol volume" />
    <mapping connection="ASP FO VHF 3 vol volume" />
    <mapping connection="ASP HF 1 volume" />
    <mapping connection="ASP HF 2 volume" />
    <mapping connection="ASP Marker vol volume" />
    <mapping connection="ASP NAV 1 vol volume" />
    <mapping connection="ASP NAV 2 vol volume" />
    <mapping connection="ASP OBS ADF 1 vol volume" />
    <mapping connection="ASP OBS ADF 2 vol volume" />
    <mapping connection="ASP OBS FLT vol volume" />
    <mapping connection="ASP OBS HF 1 volume" />
    <mapping connection="ASP OBS HF 2 volume" />
    <mapping connection="ASP OBS Marker vol volume" />
    <mapping connection="ASP OBS NAV 1 vol volume" />
    <mapping connection="ASP OBS NAV 2 vol volume" />
    <mapping connection="ASP OBS PA vol volume" />
    <mapping connection="ASP OBS Spkr vol volume" />
    <mapping connection="ASP OBS SVC vol volume" />
    <mapping connection="ASP OBS VHF 1 vol volume" />
    <mapping connection="ASP OBS VHF 2 vol volume" />
    <mapping connection="ASP OBS VHF 3 vol volume" />
    <mapping connection="ASP PA vol volume" />
    <mapping connection="ASP Spkr vol volume" />
    <mapping connection="ASP SVC vol volume" />
    <mapping connection="ASP VHF 1 vol volume" />
    <mapping connection="ASP VHF 2 vol volume" />
    <mapping connection="ASP VHF 3 vol volume" />
    <mapping connection="CDU 1 brightness" />
    <mapping connection="CDU 2 brightness" />
    <mapping connection="CONT CAB selector" />
    <mapping connection="EGT Left modifier" />
    <mapping connection="EGT Right modifier" />
    <mapping connection="Flight alt in" />
    <mapping connection="FuelFlow Left modifier" />
    <mapping connection="FuelFlow Right modifier" />
    <mapping connection="FWD CAB selector" />
    <mapping connection="Land alt in" />
    <mapping connection="Left Inboard Brightness" />
    <mapping connection="Left Outboard Brightness" />
    <mapping connection="Lower DU Brightness" />
    <mapping connection="MCP ALT VAL" />
    <mapping connection="MCP COURSE 1 VAL" />
    <mapping connection="MCP COURSE 2 VAL" />
    <mapping connection="MCP HEADING VAL" />
    <mapping connection="MCP SPEED VAL" />
    <mapping connection="MCP V/S VAL" />
    <mapping connection="N1 Left modifier" />
    <mapping connection="N1 Right modifier" />
    <mapping connection="Panel lights" />
    <mapping connection="Radio freq input ADF1" />
    <mapping connection="Radio freq input ADF2" />
    <mapping connection="Radio freq input COM1" />
    <mapping connection="Radio freq input COM2" />
    <mapping connection="Radio freq input COM3" />
    <mapping connection="Radio freq input HF1" />
    <mapping connection="Radio freq input HF2" />
    <mapping connection="Radio freq input NAV1" />
    <mapping connection="Radio freq input NAV2" />
    <mapping connection="Radio freq input XPDR" />
    <mapping connection="Radio freq input XPDR2" />
    <mapping connection="Radio standby freq input ADF1" />
    <mapping connection="Radio standby freq input ADF2" />
    <mapping connection="Radio standby freq input COM1" />
    <mapping connection="Radio standby freq input COM2" />
    <mapping connection="Radio standby freq input COM3" />
    <mapping connection="Radio standby freq input HF1" />
    <mapping connection="Radio standby freq input HF2" />
    <mapping connection="Radio standby freq input NAV1" />
    <mapping connection="Radio standby freq input NAV2" />
    <mapping connection="Radio standby freq input XPDR2" />
    <mapping connection="Right Inboard Brightness" />
    <mapping connection="Right Outboard Brightness" />
    <mapping connection="RMP Capt sense" />
    <mapping connection="RMP F/O sense" />
    <mapping connection="Upper DU Brightness" />
    <mapping connection="Chrono capt encoder" />
    <mapping connection="Chrono capt encoder pulse down Off" />
    <mapping connection="Chrono capt encoder pulse down On" />
    <mapping connection="Chrono capt encoder pulse up Off" />
    <mapping connection="Chrono capt encoder pulse up On" />
    <mapping connection="Chrono f/o encoder" />
    <mapping connection="Chrono f/o encoder pulse down Off" />
    <mapping connection="Chrono f/o encoder pulse down On" />
    <mapping connection="Chrono f/o encoder pulse up Off" />
    <mapping connection="Chrono f/o encoder pulse up On" />
    <mapping connection="EFIS 1 baro" />
    <mapping connection="EFIS 1 baro momentary Center" />
    <mapping connection="EFIS 1 baro momentary Up" />
    <mapping connection="EFIS 1 baro momentary Down" />
    <mapping connection="EFIS 1 baro momentary Up fast" />
    <mapping connection="EFIS 1 baro momentary Down fast" />
    <mapping connection="EFIS 1 baro pulse down Off" />
    <mapping connection="EFIS 1 baro pulse down On" />
    <mapping connection="EFIS 1 baro pulse up Off" />
    <mapping connection="EFIS 1 baro pulse up On" />
    <mapping connection="EFIS 1 minimums" />
    <mapping connection="EFIS 1 minimums momentary Center" />
    <mapping connection="EFIS 1 minimums momentary Up" />
    <mapping connection="EFIS 1 minimums momentary Down" />
    <mapping connection="EFIS 1 minimums momentary Up fast" />
    <mapping connection="EFIS 1 minimums momentary Down fast" />
    <mapping connection="EFIS 1 minimums pulse down Off" />
    <mapping connection="EFIS 1 minimums pulse down On" />
    <mapping connection="EFIS 1 minimums pulse up Off" />
    <mapping connection="EFIS 1 minimums pulse up On" />
    <mapping connection="EFIS 1 Mode encoder" />
    <mapping connection="EFIS 1 Mode encoder pulse down Off" />
    <mapping connection="EFIS 1 Mode encoder pulse down On" />
    <mapping connection="EFIS 1 Mode encoder pulse up Off" />
    <mapping connection="EFIS 1 Mode encoder pulse up On" />
    <mapping connection="EFIS 1 Range encoder" />
    <mapping connection="EFIS 1 Range encoder pulse down Off" />
    <mapping connection="EFIS 1 Range encoder pulse down On" />
    <mapping connection="EFIS 1 Range encoder pulse up Off" />
    <mapping connection="EFIS 1 Range encoder pulse up On" />
    <mapping connection="EFIS 2 baro" />
    <mapping connection="EFIS 2 baro momentary Center" />
    <mapping connection="EFIS 2 baro momentary Up" />
    <mapping connection="EFIS 2 baro momentary Down" />
    <mapping connection="EFIS 2 baro momentary Up fast" />
    <mapping connection="EFIS 2 baro momentary Down fast" />
    <mapping connection="EFIS 2 baro pulse down Off" />
    <mapping connection="EFIS 2 baro pulse down On" />
    <mapping connection="EFIS 2 baro pulse up Off" />
    <mapping connection="EFIS 2 baro pulse up On" />
    <mapping connection="EFIS 2 minimums" />
    <mapping connection="EFIS 2 minimums momentary Center" />
    <mapping connection="EFIS 2 minimums momentary Up" />
    <mapping connection="EFIS 2 minimums momentary Down" />
    <mapping connection="EFIS 2 minimums momentary Up fast" />
    <mapping connection="EFIS 2 minimums momentary Down fast" />
    <mapping connection="EFIS 2 minimums pulse down Off" />
    <mapping connection="EFIS 2 minimums pulse down On" />
    <mapping connection="EFIS 2 minimums pulse up Off" />
    <mapping connection="EFIS 2 minimums pulse up On" />
    <mapping connection="EFIS 2 Mode encoder" />
    <mapping connection="EFIS 2 Mode encoder pulse down Off" />
    <mapping connection="EFIS 2 Mode encoder pulse down On" />
    <mapping connection="EFIS 2 Mode encoder pulse up Off" />
    <mapping connection="EFIS 2 Mode encoder pulse up On" />
    <mapping connection="EFIS 2 Range encoder" />
    <mapping connection="EFIS 2 Range encoder pulse down Off" />
    <mapping connection="EFIS 2 Range encoder pulse down On" />
    <mapping connection="EFIS 2 Range encoder pulse up Off" />
    <mapping connection="EFIS 2 Range encoder pulse up On" />
    <mapping connection="Flight alt in encoder pulse down Off" />
    <mapping connection="Flight alt in encoder pulse down On" />
    <mapping connection="Flight alt in encoder pulse up Off" />
    <mapping connection="Flight alt in encoder pulse up On" />
    <mapping connection="ISFD baro encoder" />
    <mapping connection="ISFD baro encoder pulse down Off" />
    <mapping connection="ISFD baro encoder pulse down On" />
    <mapping connection="ISFD baro encoder pulse up Off" />
    <mapping connection="ISFD baro encoder pulse up On" />
    <mapping connection="Land alt in encoder pulse down Off" />
    <mapping connection="Land alt in encoder pulse down On" />
    <mapping connection="Land alt in encoder pulse up Off" />
    <mapping connection="Land alt in encoder pulse up On" />
    <mapping connection="MCP ALT VAL encoder" />
    <mapping connection="MCP ALT VAL encoder pulse down Off" />
    <mapping connection="MCP ALT VAL encoder pulse down On" />
    <mapping connection="MCP ALT VAL encoder pulse up Off" />
    <mapping connection="MCP ALT VAL encoder pulse up On" />
    <mapping connection="MCP COURSE 1 VAL encoder" />
    <mapping connection="MCP COURSE 1 VAL encoder pulse down Off" />
    <mapping connection="MCP COURSE 1 VAL encoder pulse down On" />
    <mapping connection="MCP COURSE 1 VAL encoder pulse up Off" />
    <mapping connection="MCP COURSE 1 VAL encoder pulse up On" />
    <mapping connection="MCP COURSE 2 VAL encoder" />
    <mapping connection="MCP COURSE 2 VAL encoder pulse down Off" />
    <mapping connection="MCP COURSE 2 VAL encoder pulse down On" />
    <mapping connection="MCP COURSE 2 VAL encoder pulse up Off" />
    <mapping connection="MCP COURSE 2 VAL encoder pulse up On" />
    <mapping connection="MCP HEADING VAL encoder" />
    <mapping connection="MCP HEADING VAL encoder pulse down Off" />
    <mapping connection="MCP HEADING VAL encoder pulse down On" />
    <mapping connection="MCP HEADING VAL encoder pulse up Off" />
    <mapping connection="MCP HEADING VAL encoder pulse up On" />
    <mapping connection="MCP SPEED VAL encoder" />
    <mapping connection="MCP SPEED VAL encoder pulse down Off" />
    <mapping connection="MCP SPEED VAL encoder pulse down On" />
    <mapping connection="MCP SPEED VAL encoder pulse up Off" />
    <mapping connection="MCP SPEED VAL encoder pulse up On" />
    <mapping connection="MCP V/S VAL encoder" />
    <mapping connection="MCP V/S VAL encoder pulse down Off" />
    <mapping connection="MCP V/S VAL encoder pulse down On" />
    <mapping connection="MCP V/S VAL encoder pulse up Off" />
    <mapping connection="MCP V/S VAL encoder pulse up On" />
    <mapping connection="N1 SET Rotary" />
    <mapping connection="N1 SET Rotary momentary Center" />
    <mapping connection="N1 SET Rotary momentary Up" />
    <mapping connection="N1 SET Rotary momentary Down" />
    <mapping connection="N1 SET Rotary momentary Up fast" />
    <mapping connection="N1 SET Rotary momentary Down fast" />
    <mapping connection="N1 SET Rotary pulse down Off" />
    <mapping connection="N1 SET Rotary pulse down On" />
    <mapping connection="N1 SET Rotary pulse up Off" />
    <mapping connection="N1 SET Rotary pulse up On" />
    <mapping connection="Radio ADF1 hundreds active" />
    <mapping connection="Radio ADF1 hundreds active pulse down Off" />
    <mapping connection="Radio ADF1 hundreds active pulse down On" />
    <mapping connection="Radio ADF1 hundreds active pulse up Off" />
    <mapping connection="Radio ADF1 hundreds active pulse up On" />
    <mapping connection="Radio ADF1 inner shaft" />
    <mapping connection="Radio ADF1 inner shaft active" />
    <mapping connection="Radio ADF1 inner shaft active pulse down Off" />
    <mapping connection="Radio ADF1 inner shaft active pulse down On" />
    <mapping connection="Radio ADF1 inner shaft active pulse up Off" />
    <mapping connection="Radio ADF1 inner shaft active pulse up On" />
    <mapping connection="Radio ADF1 inner shaft pulse down Off" />
    <mapping connection="Radio ADF1 inner shaft pulse down On" />
    <mapping connection="Radio ADF1 inner shaft pulse up Off" />
    <mapping connection="Radio ADF1 inner shaft pulse up On" />
    <mapping connection="Radio ADF1 outer shaft" />
    <mapping connection="Radio ADF1 outer shaft active" />
    <mapping connection="Radio ADF1 outer shaft active pulse down Off" />
    <mapping connection="Radio ADF1 outer shaft active pulse down On" />
    <mapping connection="Radio ADF1 outer shaft active pulse up Off" />
    <mapping connection="Radio ADF1 outer shaft active pulse up On" />
    <mapping connection="Radio ADF1 outer shaft pulse down Off" />
    <mapping connection="Radio ADF1 outer shaft pulse down On" />
    <mapping connection="Radio ADF1 outer shaft pulse up Off" />
    <mapping connection="Radio ADF1 outer shaft pulse up On" />
    <mapping connection="Radio ADF2 hundreds active" />
    <mapping connection="Radio ADF2 hundreds active pulse down Off" />
    <mapping connection="Radio ADF2 hundreds active pulse down On" />
    <mapping connection="Radio ADF2 hundreds active pulse up Off" />
    <mapping connection="Radio ADF2 hundreds active pulse up On" />
    <mapping connection="Radio ADF2 inner shaft" />
    <mapping connection="Radio ADF2 inner shaft active" />
    <mapping connection="Radio ADF2 inner shaft active pulse down Off" />
    <mapping connection="Radio ADF2 inner shaft active pulse down On" />
    <mapping connection="Radio ADF2 inner shaft active pulse up Off" />
    <mapping connection="Radio ADF2 inner shaft active pulse up On" />
    <mapping connection="Radio ADF2 inner shaft pulse down Off" />
    <mapping connection="Radio ADF2 inner shaft pulse down On" />
    <mapping connection="Radio ADF2 inner shaft pulse up Off" />
    <mapping connection="Radio ADF2 inner shaft pulse up On" />
    <mapping connection="Radio ADF2 outer shaft" />
    <mapping connection="Radio ADF2 outer shaft active" />
    <mapping connection="Radio ADF2 outer shaft active pulse down Off" />
    <mapping connection="Radio ADF2 outer shaft active pulse down On" />
    <mapping connection="Radio ADF2 outer shaft active pulse up Off" />
    <mapping connection="Radio ADF2 outer shaft active pulse up On" />
    <mapping connection="Radio ADF2 outer shaft pulse down Off" />
    <mapping connection="Radio ADF2 outer shaft pulse down On" />
    <mapping connection="Radio ADF2 outer shaft pulse up Off" />
    <mapping connection="Radio ADF2 outer shaft pulse up On" />
    <mapping connection="Radio COM1 inner shaft" />
    <mapping connection="Radio COM1 inner shaft pulse down Off" />
    <mapping connection="Radio COM1 inner shaft pulse down On" />
    <mapping connection="Radio COM1 inner shaft pulse up Off" />
    <mapping connection="Radio COM1 inner shaft pulse up On" />
    <mapping connection="Radio COM1 outer shaft" />
    <mapping connection="Radio COM1 outer shaft pulse down Off" />
    <mapping connection="Radio COM1 outer shaft pulse down On" />
    <mapping connection="Radio COM1 outer shaft pulse up Off" />
    <mapping connection="Radio COM1 outer shaft pulse up On" />
    <mapping connection="Radio COM2 inner shaft" />
    <mapping connection="Radio COM2 inner shaft pulse down Off" />
    <mapping connection="Radio COM2 inner shaft pulse down On" />
    <mapping connection="Radio COM2 inner shaft pulse up Off" />
    <mapping connection="Radio COM2 inner shaft pulse up On" />
    <mapping connection="Radio COM2 outer shaft" />
    <mapping connection="Radio COM2 outer shaft pulse down Off" />
    <mapping connection="Radio COM2 outer shaft pulse down On" />
    <mapping connection="Radio COM2 outer shaft pulse up Off" />
    <mapping connection="Radio COM2 outer shaft pulse up On" />
    <mapping connection="Radio COM3 inner shaft" />
    <mapping connection="Radio COM3 inner shaft pulse down Off" />
    <mapping connection="Radio COM3 inner shaft pulse down On" />
    <mapping connection="Radio COM3 inner shaft pulse up Off" />
    <mapping connection="Radio COM3 inner shaft pulse up On" />
    <mapping connection="Radio COM3 outer shaft" />
    <mapping connection="Radio COM3 outer shaft pulse down Off" />
    <mapping connection="Radio COM3 outer shaft pulse down On" />
    <mapping connection="Radio COM3 outer shaft pulse up Off" />
    <mapping connection="Radio COM3 outer shaft pulse up On" />
    <mapping connection="Radio NAV1 inner shaft" />
    <mapping connection="Radio NAV1 inner shaft pulse down Off" />
    <mapping connection="Radio NAV1 inner shaft pulse down On" />
    <mapping connection="Radio NAV1 inner shaft pulse up Off" />
    <mapping connection="Radio NAV1 inner shaft pulse up On" />
    <mapping connection="Radio NAV1 outer shaft" />
    <mapping connection="Radio NAV1 outer shaft pulse down Off" />
    <mapping connection="Radio NAV1 outer shaft pulse down On" />
    <mapping connection="Radio NAV1 outer shaft pulse up Off" />
    <mapping connection="Radio NAV1 outer shaft pulse up On" />
    <mapping connection="Radio NAV2 inner shaft" />
    <mapping connection="Radio NAV2 inner shaft pulse down Off" />
    <mapping connection="Radio NAV2 inner shaft pulse down On" />
    <mapping connection="Radio NAV2 inner shaft pulse up Off" />
    <mapping connection="Radio NAV2 inner shaft pulse up On" />
    <mapping connection="Radio NAV2 outer shaft" />
    <mapping connection="Radio NAV2 outer shaft pulse down Off" />
    <mapping connection="Radio NAV2 outer shaft pulse down On" />
    <mapping connection="Radio NAV2 outer shaft pulse up Off" />
    <mapping connection="Radio NAV2 outer shaft pulse up On" />
    <mapping connection="Radio XPDR inner shaft left" />
    <mapping connection="Radio XPDR inner shaft left pulse down Off" />
    <mapping connection="Radio XPDR inner shaft left pulse down On" />
    <mapping connection="Radio XPDR inner shaft left pulse up Off" />
    <mapping connection="Radio XPDR inner shaft left pulse up On" />
    <mapping connection="Radio XPDR inner shaft right" />
    <mapping connection="Radio XPDR inner shaft right pulse down Off" />
    <mapping connection="Radio XPDR inner shaft right pulse down On" />
    <mapping connection="Radio XPDR inner shaft right pulse up Off" />
    <mapping connection="Radio XPDR inner shaft right pulse up On" />
    <mapping connection="Radio XPDR outer shaft left" />
    <mapping connection="Radio XPDR outer shaft left pulse down Off" />
    <mapping connection="Radio XPDR outer shaft left pulse down On" />
    <mapping connection="Radio XPDR outer shaft left pulse up Off" />
    <mapping connection="Radio XPDR outer shaft left pulse up On" />
    <mapping connection="Radio XPDR outer shaft right" />
    <mapping connection="Radio XPDR outer shaft right pulse down Off" />
    <mapping connection="Radio XPDR outer shaft right pulse down On" />
    <mapping connection="Radio XPDR outer shaft right pulse up Off" />
    <mapping connection="Radio XPDR outer shaft right pulse up On" />
    <mapping connection="RMP Capt inner encoder" />
    <mapping connection="RMP Capt inner encoder pulse down Off" />
    <mapping connection="RMP Capt inner encoder pulse down On" />
    <mapping connection="RMP Capt inner encoder pulse up Off" />
    <mapping connection="RMP Capt inner encoder pulse up On" />
    <mapping connection="RMP Capt outer encoder" />
    <mapping connection="RMP Capt outer encoder pulse down Off" />
    <mapping connection="RMP Capt outer encoder pulse down On" />
    <mapping connection="RMP Capt outer encoder pulse up Off" />
    <mapping connection="RMP Capt outer encoder pulse up On" />
    <mapping connection="RMP F/O inner encoder" />
    <mapping connection="RMP F/O inner encoder pulse down Off" />
    <mapping connection="RMP F/O inner encoder pulse down On" />
    <mapping connection="RMP F/O inner encoder pulse up Off" />
    <mapping connection="RMP F/O inner encoder pulse up On" />
    <mapping connection="RMP F/O outer encoder" />
    <mapping connection="RMP F/O outer encoder pulse down Off" />
    <mapping connection="RMP F/O outer encoder pulse down On" />
    <mapping connection="RMP F/O outer encoder pulse up Off" />
    <mapping connection="RMP F/O outer encoder pulse up On" />
    <mapping connection="SPD REF Rotary" />
    <mapping connection="SPD REF Rotary momentary Center" />
    <mapping connection="SPD REF Rotary momentary Up" />
    <mapping connection="SPD REF Rotary momentary Down" />
    <mapping connection="SPD REF Rotary momentary Up fast" />
    <mapping connection="SPD REF Rotary momentary Down fast" />
    <mapping connection="SPD REF Rotary pulse down Off" />
    <mapping connection="SPD REF Rotary pulse down On" />
    <mapping connection="SPD REF Rotary pulse up Off" />
    <mapping connection="SPD REF Rotary pulse up On" />
    <mapping connection="Standby altimeter QNH" />
    <mapping connection="Standby altimeter QNH momentary Center" />
    <mapping connection="Standby altimeter QNH momentary Up" />
    <mapping connection="Standby altimeter QNH momentary Down" />
    <mapping connection="Standby altimeter QNH momentary Up fast" />
    <mapping connection="Standby altimeter QNH momentary Down fast" />
    <mapping connection="Standby altimeter QNH pulse down Off" />
    <mapping connection="Standby altimeter QNH pulse down On" />
    <mapping connection="Standby altimeter QNH pulse up Off" />
    <mapping connection="Standby altimeter QNH pulse up On" />
    <mapping connection="Flap input" />
    <mapping connection="Speedbrake input" />
    <mapping connection="Speedbrake servo" />
    <mapping connection="Throttle input left" />
    <mapping connection="Throttle Servo left" />
    <mapping connection="Throttle reverser input left" />
    <mapping connection="Throttle left reverser switch Off" />
    <mapping connection="Throttle left reverser switch Reverse" />
    <mapping connection="Throttle reverser input right" />
    <mapping connection="Throttle right reverser switch Off" />
    <mapping connection="Throttle right reverser switch Reverse" />
    <mapping connection="Throttle input right" />
    <mapping connection="Throttle Servo right" />
  </mappings>
  <leds>
    <intensit'y color="YELLOW" high="29" low="56" />
    <intensit'y color="BLUE" high="28" low="56" />
    <intensit'y color="GREEN" high="28" low="55" />
    <intensit'y color="RED" high="28" low="56" />
    <intensit'y color="WARNING_RED" high="27" low="57" />
    <intensit'y color="WARNING_YELLOW" high="28" low="58" />
    <intensit'y color="WHITE" high="28" low="61" />
  </leds>
  <showQuickstart value="true" />
  <startMinimized value="true" />
  <allowNegativeFreq value="true" />
  <debugMode value="false" />
  <autoRestart value="true" />
  <situation value="Cold &amp; Dark" />
  <autoFailure amount="0" />
  <webserver port="8080" />
  <acars host="acars.prosim-ar.com" profile="Silent" t'ailNumber="" printMarginLeft="0" printMarginTop="0" />
  <logLevel level="Verbose" />
  <updates level="0" monitorBetaVersions="False" />
  <gaugeSmoothing value="57" />
  <viewpoints>
    <capt'ain x="0" y="0" z="0" pitch="0" bank="0" heading="0" />
    <center x="0" y="0" z="0" pitch="0" bank="0" heading="0" />
    <firstOfficer x="0" y="0" z="0" pitch="0" bank="0" heading="0" />
  </viewpoints>
  <speedbrakeServoFree value="false" />
  <simulator value="MSFS" />
  <audioAddons>
    <item name="PACK L" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\PMDG_737_Packs modifié L version2.wav" fadeIn="" fadeOut="" continuous="true" autoFade="false" />
    <item name="PACK R" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\PMDG_737_Packs modifié R version2.wav" fadeIn="" fadeOut="" continuous="true" autoFade="false" />
    <item name="BATTERY power on" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\737 Batterie sept.wav" fadeIn="" fadeOut="" continuous="true" autoFade="false" />
    <item name="FO  80 KTS" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\prosim_80kts.wav" fadeIn="" fadeOut="" continuous="false" autoFade="false" />
    <item name="Prosim_V2" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\V2.wav" fadeIn="" fadeOut="" continuous="false" autoFade="false" />
    <item name="Prosim_VR" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\Vr.wav" fadeIn="" fadeOut="" continuous="false" autoFade="false" />
    <item name="APU STOP" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\apuoff oct.wav" fadeIn="" fadeOut="" continuous="false" autoFade="false" />
    <item name="SPEEDBRAKE" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\SpeedBrakeDeploy.wav" fadeIn="" fadeOut="" continuous="false" autoFade="false" />
    <item name="Hydraulic A" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\Hydraulics A 23 avril.wav" fadeIn="" fadeOut="" continuous="true" autoFade="true" />
    <item name="Hydraulic B" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\Hydraulics B 23 avril.wav" fadeIn="" fadeOut="" continuous="true" autoFade="true" />
    <item name="L Recirc Fan L" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\Recirc air Left.wav" fadeIn="" fadeOut="" continuous="true" autoFade="false" />
    <item name="R Recirc Fan R" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\Recirc air Right.wav" fadeIn="" fadeOut="" continuous="true" autoFade="false" />
    <item name="APU start" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\apu start oct.wav" fadeIn="" fadeOut="" continuous="false" autoFade="false" />
    <item name="TRIM DOWN" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\prosim_trimdown.wav" fadeIn="" fadeOut="" continuous="false" autoFade="false" />
    <item name="TRIM UP" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\prosim_trimup.wav" fadeIn="" fadeOut="" continuous="false" autoFade="false" />
    <item name="nchime" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\chime.wav" fadeIn="" fadeOut="" continuous="false" autoFade="false" />
    <item name="Prosim_V1" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\V1.wav" fadeIn="" fadeOut="" continuous="false" autoFade="false" />
    <item name="B737 APU GEN RUN" file="C:\ProSimAudio\AUDIO Ajoutés AVRIL\APU Run nouv.wav" fadeIn="" fadeOut="" continuous="true" autoFade="false" />
  </audioAddons>
  <compan'yRouteSources />
  <requiredHardware />
  <genericCOMportSupport value="false" baud="115200" stopBits="One" parit'y="None" dataBits="8" tcpPort="8091" tcpGlobal="true" tcpMixed="false" />
  <CPFlight value="true">
    <sendGaugeData>true</sendGaugeData>
    <reverseRudderTrimGauge>true</reverseRudderTrimGauge>
  </CPFlight>
  <CPFlightDirect />
  <directInputEnabled value="true" />
  <ehid>
    <brightness>100</brightness>
  </ehid>
  <fds value="true" mcpSupport="false">
    <encoders reverse1="false" reverse2="false" reverse3="false" reverse4="false" reverse5="false" reverse6="false" reverse7="false" reverse8="false" reverse9="false" reverse10="false" reverse11="false" />
  </fds>
  <fscStickShaker />
  <fsuipcSupport value="true" />
  <flightIllusionPort port="[Not installed]" altSpeedCombined="false" />
  <fsbusPort />
  <goflightSupport value="false" />
  <ICS delay="2" inverseCrossfeed="false" />
  <matrixOrbitalSupport value="false" />
  <phidgetSupport value="true" voltage="Default" currentLimit="Default" motorSpeed="50" motorSpeed2="50" motorReverse1="false" motorReverse2="false" />
  <pimOverhead port="[Not installed]" />
  <pimAlt />
  <pimIRS />
  <poldragonet port="[Not installed]" inverseGear="false" inverseMFD="false" />
  <poldragonetOverhead port="[Not installed]" manualConfigure="false" />
  <simio value="false" />
  <sims'ystems value="false" />
  <simworld value="false" />
  <sismoSupport value="false" brightness="15">
    <MCP hasEfisCpt="true" hasEfisFo="true" />
  </sismoSupport>
  <VRInsightOvhdSupport />
  <IOCP server="192.168.1.45" port="8092" />
  <pokeysSupport value="true" autoConfig="true" offload="false" fastInterface="true" udp="true" pollerEnabled="false" pokeysLog="false">
    <inhibit></inhibit>
  </pokeysSupport>
  <pou value="true" />
</config>

Silverstar · 30 Octobre 2017

Je te renvoie le config.XML par MP avec un petite modification tout à l'heure, tu as juste a remplacer lactuelle par celui que je tenvoie. Pense a sauvegarder lactuelle dans un coin On va déja inverser les positions NORM et ENG PRI et ensuite on fera les modifications au fur et mesure au besoin.

Pierrot77 · 30 Octobre 2017

Merci Silver pour ton aide

Silverstar · 30 Octobre 2017

MP envoyé

Fcoq · 30 Octobre 2017

Pour l'adresse du chèque.....

Silverstar · 30 Octobre 2017

Il ne faut pas vendre la peau de lours avant de lavoir tuer

Pierrot77 · 30 Octobre 2017

Bon Silver
Je viens de remplacer mon fichier XML par celui que tu mas envoyé
Résultat des courses , mon EICAS bas reste sans affichage , peu importe la position du switch rotatif du panel CAP LOWER DU
Au niveau de mon MFD si j'appuie sur les boutons SYS ou ENG , rien ne s'affiche sur lEICAS BAS
Voilà le retour des infos
:eek:

Pierre

Silverstar · 30 Octobre 2017

Ah c'est bizarre tout ça!!

Est ce que par hasard tu as avec FDS un logiciel de contrôle pour vérifier la position des switchs?
Il faudrait que tu bouges les positions du switch rotatif sur NORM, ENG PRI et ND pour connaitre le numéro du port.

Pierrot77 a dit:
Je sais que j'ai galéré pour configurer mes switchs par la méthode automatique de Prosim car les valeurs affichées ne correspondaient pas forcement au n° de port sur la carte FDS , lequel avait raison !!!!! je nen sais rien !!!

Ca aussi c'est bizarre parceque quand tu déplaces ton switch dans le Config de prosim il devrait te donner les meme valeurs!!

Pierrot77 · 30 Octobre 2017

Je vais vérifier tout ça et te donnerais des nouvelles
Merci l'ami

Silverstar · 30 Octobre 2017

ok Tu regardes ça tranquillement et on voit ça ensemble.
Aussi tu tournes avec quelle version de Prosim?
Et tu as juste ce probleme dincohérence avec le Lower DU, pas d'autres trucs bizarre sur ton MIP?

Pierrot77 · 30 Octobre 2017

Ok merci
j'ai la dernière version de Prosim la 1.52 mais le problème exist'ait avec les précédentes :|

Silverstar · 30 Octobre 2017

Ok parceque dans le Config.Xml que tu mas donné chaque position à un numéro de port, j'ai juste inverser le NORM avec le ENG PRI et c'est bizarre puisque le ENG PRI affichait normalement comme sil était la position NORM...ya un truc qui cloche

Code:

<mapping connection="Lower DU Capt Norm">
      <FDS serial="03EA000005F4" port="53" type="SWITCH" />
    </mapping>
    <mapping connection="Lower DU Capt ND">
      <FDS serial="03EA000005F4" port="55" type="SWITCH" />
    </mapping>
    <mapping connection="Lower DU Capt Eng Pri">
      <FDS serial="03EA000005F4" port="54" type="SWITCH" />

Il faut que tu vérifies pour savoir sil n'y a pas un problème matériel et que les 53 54 et 55 correspondent bien au LOWER DU.

Pierrot77 · 30 Octobre 2017

Alors peut être qu'il y a un souci avec le switch rotatif car un coup dans l'onglet Prosim il me met ENG PRI en port 55 et si je me met sur la position NORMAL il me détecte aussi le port 55 !!!curieux
Par contre le port 53 correspond au switch rotatif MAIN PANEL DU sur la position MFD :/

Lower DU
Engine Pri = port 54
Normal = port 55
ND = port 56

Silverstar · 31 Octobre 2017

Salut Pierrot,

Jete un coup d'oeil au cablage voir si tout est OK.

Pierrot77 · 31 Octobre 2017

Bonjour Windy
Je fais ça dès que possible car aujourd'hui je ne peux pas , je te tiens au courant
Pierrot
A ++++
:|

Silverstar · 15 Novembre 2017

Salut Pierrot, tu as jeter un il au cablage?

Pierrot77 · 16 Novembre 2017

Bonjour Windy
Hélas non , je n'ai pas eu le temps de vérifier le switch rotatif car j'avais d'autres occupations dans mon pavillon !!!!
Le switch LOWER DU est bien un swicht rotatif 90° auquel cas je le remplacerais car il me semble qu'il y a un faux contact !!!
Dès que je le peux je m'y colle.
Je dois aussi moccuper de fixer les accoudoirs que tu mavais vendu sur mes sièges Airbus
Voilà ou j'en suis
Amicalement
Pierrot