Opencockpits 64 USB Outputs Card

7

767300

ELEVE PILOTE
Messages
6
Réactions
0
Points
2
Hello is an'yone familiar with the Opencockpits usb outputs card as to how to wire 24v power to it? I am confused as to where m'y wires coming from m'y power supply go to the card as well as what jumper is opened and closed. It seems I fried it already trying to follow OCs diagram on which jumpers are closed and open. An'y guidance is appreciated.

Dann'y
 
Hello Dann'y, What is the reference of the card ?
 
Hello I am referring to the 64 outputs card from opencockpits. I am using OEM panels with real bulbs that are 28v, but I have a 24 volt power supply.

D
 
Best for output its a open collector card
With OC you have need a additonal interface if you talk about a "Master" :(
JeanMi
 
OK, the card ref. is 2T17, and its pecfect for use with 5v to 40 v with 500mA (2.5A max for all out)

- Just connect your bulb (bulb 28v on 24v its OK) between one OUT and +24V
- connect 24V and USB
- Jumper 1 CLOSED, Jumper 2 OPEN for select : card supply USB and OUT supply for external (24V)

Fabien
 
Connectez vous pour répondre ici.
Retour
Haut